diff --git a/CFwarp4.sh b/CFwarp4.sh index e7a4606..bb0c230 100644 --- a/CFwarp4.sh +++ b/CFwarp4.sh @@ -1,8 +1,9 @@ #!/bin/bash export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin:~/bin export LANG=en_US.UTF-8 -wpygV="22.8.25 V 0.1" +wpygV="23.4.11 V 0.9.9 " remoteV=`wget -qO- https://gitlab.com/rwkgyg/CFwarp/raw/main/CFwarp.sh | sed -n 4p | cut -d '"' -f 2` +chmod +x /root/CFwarp.sh red='\033[0;31m' bblue='\033[0;34m' yellow='\033[0;33m' @@ -18,9 +19,8 @@ rred(){ echo -e "\033[35m\033[01m$1\033[0m";} readtp(){ read -t5 -n26 -p "$(yellow "$1")" $2;} readp(){ read -p "$(yellow "$1")" $2;} [[ $EUID -ne 0 ]] && yellow "请以root模式运行脚本" && exit - -start(){ -yellow " 请稍等3秒……正在扫描vps类型及参数中……" +#[[ -e /etc/hosts ]] && grep -qE '^ *172.65.251.78 gitlab.com' /etc/hosts || echo -e '\n172.65.251.78 gitlab.com' >> /etc/hosts +yellow " 请稍等……正在扫描vps类型及参数中……" if [[ -f /etc/redhat-release ]]; then release="Centos" elif cat /etc/issue | grep -q -E -i "debian"; then @@ -47,10 +47,18 @@ op=`sys` version=`uname -r | awk -F "-" '{print $1}'` main=`uname -r | awk -F . '{print $1}'` minor=`uname -r | awk -F . '{print $2}'` -bit=`uname -m` -[[ $bit = x86_64 ]] && cpu=amd64 -[[ $bit = aarch64 ]] && cpu=arm64 vi=`systemd-detect-virt` +cpujg(){ +bit=`uname -m` +if [[ $bit = aarch64 ]]; then +cpu=arm64 +elif [[ $bit = x86_64 ]]; then +cpu=amd64 +else +red "目前脚本不支持$bit架构" && exit +fi +} + if [[ $vi = openvz ]]; then TUN=$(cat /dev/net/tun 2>&1) if [[ ! $TUN =~ 'in bad state' ]] && [[ ! $TUN =~ '处于错误状态' ]] && [[ ! $TUN =~ 'Die Dateizugriffsnummer ist in schlechter Verfassung' ]]; then @@ -76,31 +84,80 @@ green "TUN守护功能已启动" fi fi fi -if [[ ! -f /root/nf || ! -s /root/nf ]]; then -wget -O nf https://raw.githubusercontent.com/rkygogo/netflix-verify/main/nf_linux_$cpu -chmod +x nf -fi + [[ $(type -P yum) ]] && yumapt='yum -y' || yumapt='apt -y' -[[ $(type -P curl) ]] || (yellow "检测到curl未安装，升级安装中" && $yumapt update;$yumapt install curl) -[[ $(type -P bc) ]] || ($yumapt update;$yumapt install bc) -[[ ! $(type -P qrencode) ]] && ($yumapt update;$yumapt install qrencode) -[[ ! $(type -P python3) ]] && (yellow "检测到python3未安装，升级安装中" && $yumapt update;$yumapt install python3) -[[ ! $(type -P screen) ]] && (yellow "检测到screen未安装，升级安装中" && $yumapt update;$yumapt install screen) +if [[ ! $(type -P curl) ]]; then +$yumapt update;$yumapt install curl +fi +if [[ ! $(type -P bc) ]]; then +$yumapt update;$yumapt install bc +fi +if [[ ! $(type -P qrencode) ]]; then +$yumapt update;$yumapt install qrencode +fi +if [[ ! $(type -P python3) ]]; then +$yumapt update;$yumapt install python3 +fi +if [[ ! $(type -P screen) ]]; then +$yumapt update;$yumapt install screen +fi +if [[ ! $(type -P cron) ]]; then +$yumapt update;apt install cron -y;yum install cronie -y +fi + +nf4() { +result=`curl --connect-timeout 5 -4sSL "https://www.netflix.com/" 2>&1` +[ "$result" == "Not Available" ] && NF="死心吧，Netflix不服务当前IP地区" && return +[[ "$result" == "curl"* ]] && NF="错误，无法连接到Netflix官网" && return +result=`curl -4sL "https://www.netflix.com/title/80018499" 2>&1` +[[ "$result" == *"page-404"* || "$result" == *"NSEZ-403"* ]] && NF="杯具，当前IP不能看Netflix" && return +result1=`curl -4sL "https://www.netflix.com/title/70143836" 2>&1` +result2=`curl -4sL "https://www.netflix.com/title/80027042" 2>&1` +result3=`curl -4sL "https://www.netflix.com/title/70140425" 2>&1` +result4=`curl -4sL "https://www.netflix.com/title/70283261" 2>&1` +result5=`curl -4sL "https://www.netflix.com/title/70143860" 2>&1` +result6=`curl -4sL "https://www.netflix.com/title/70202589" 2>&1` +[[ "$result1" == *"page-404"* && "$result2" == *"page-404"* && "$result3" == *"page-404"* && "$result4" == *"page-404"* && "$result5" == *"page-404"* && "$result6" == *"page-404"* ]] && NF="遗憾，当前IP仅可观看Netflix自制剧" && return +NF="恭喜，当前IP支持观看Netflix非自制剧" && return } -ud4='sed -i "7 s/^/PostUp = ip -4 rule add from $(ip route get 162.159.192.1 | grep -oP '"'src \K\S+') lookup main\n/"'" /etc/wireguard/wgcf.conf && sed -i "7 s/^/PostDown = ip -4 rule delete from $(ip route get 162.159.192.1 | grep -oP '"'src \K\S+') lookup main\n/"'" /etc/wireguard/wgcf.conf' -ud6='sed -i "7 s/^/PostUp = ip -6 rule add from $(ip route get 2606:4700:d0::a29f:c001 | grep -oP '"'src \K\S+') lookup main\n/"'" /etc/wireguard/wgcf.conf && sed -i "7 s/^/PostDown = ip -6 rule delete from $(ip route get 2606:4700:d0::a29f:c001 | grep -oP '"'src \K\S+') lookup main\n/"'" /etc/wireguard/wgcf.conf' -ud4ud6='sed -i "7 s/^/PostUp = ip -4 rule add from $(ip route get 162.159.192.1 | grep -oP '"'src \K\S+') lookup main\n/"'" /etc/wireguard/wgcf.conf && sed -i "7 s/^/PostDown = ip -4 rule delete from $(ip route get 162.159.192.1 | grep -oP '"'src \K\S+') lookup main\n/"'" /etc/wireguard/wgcf.conf && sed -i "7 s/^/PostUp = ip -6 rule add from $(ip route get 2606:4700:d0::a29f:c001 | grep -oP '"'src \K\S+') lookup main\n/"'" /etc/wireguard/wgcf.conf && sed -i "7 s/^/PostDown = ip -6 rule delete from $(ip route get 2606:4700:d0::a29f:c001 | grep -oP '"'src \K\S+') lookup main\n/"'" /etc/wireguard/wgcf.conf' -c1="sed -i '/0\.0\.0\.0\/0/d' /etc/wireguard/wgcf.conf" -c2="sed -i '/\:\:\/0/d' /etc/wireguard/wgcf.conf" -c3="sed -i 's/engage.cloudflareclient.com/162.159.193.10/g' /etc/wireguard/wgcf.conf" -c4="sed -i 's/engage.cloudflareclient.com/2606:4700:d0::a29f:c001/g' /etc/wireguard/wgcf.conf" -c5="sed -i 's/1.1.1.1/8.8.8.8,2001:4860:4860::8888/g' /etc/wireguard/wgcf.conf" -c6="sed -i 's/1.1.1.1/2001:4860:4860::8888,8.8.8.8/g' /etc/wireguard/wgcf.conf" +nf6() { +result=`curl --connect-timeout 5 -6sSL "https://www.netflix.com/" 2>&1` +[ "$result" == "Not Available" ] && NF="死心吧，Netflix不服务当前IP地区" && return +[[ "$result" == "curl"* ]] && NF="错误，无法连接到Netflix官网" && return +result=`curl -6sL "https://www.netflix.com/title/80018499" 2>&1` +[[ "$result" == *"page-404"* || "$result" == *"NSEZ-403"* ]] && NF="杯具，当前IP不能看Netflix" && return +result1=`curl -6sL "https://www.netflix.com/title/70143836" 2>&1` +result2=`curl -6sL "https://www.netflix.com/title/80027042" 2>&1` +result3=`curl -6sL "https://www.netflix.com/title/70140425" 2>&1` +result4=`curl -6sL "https://www.netflix.com/title/70283261" 2>&1` +result5=`curl -6sL "https://www.netflix.com/title/70143860" 2>&1` +result6=`curl -6sL "https://www.netflix.com/title/70202589" 2>&1` +[[ "$result1" == *"page-404"* && "$result2" == *"page-404"* && "$result3" == *"page-404"* && "$result4" == *"page-404"* && "$result5" == *"page-404"* && "$result6" == *"page-404"* ]] && NF="遗憾，当前IP仅可观看Netflix自制剧" && return +NF="恭喜，当前IP支持观看Netflix非自制剧" && return +} + +nfs5() { +result=`curl -sx socks5h://localhost:$mport --connect-timeout 5 -4sSL "https://www.netflix.com/" 2>&1` +[ "$result" == "Not Available" ] && NF="死心吧，Netflix不服务当前IP地区" && return +[[ "$result" == "curl"* ]] && NF="错误，无法连接到Netflix官网" && return +result=`curl -sx socks5h://localhost:$mport -4sL "https://www.netflix.com/title/80018499" 2>&1` +[[ "$result" == *"page-404"* || "$result" == *"NSEZ-403"* ]] && NF="杯具，当前IP不能看Netflix" && return +result1=`curl -sx socks5h://localhost:$mport -4sL "https://www.netflix.com/title/70143836" 2>&1` +result2=`curl -sx socks5h://localhost:$mport -4sL "https://www.netflix.com/title/80027042" 2>&1` +result3=`curl -sx socks5h://localhost:$mport -4sL "https://www.netflix.com/title/70140425" 2>&1` +result4=`curl -sx socks5h://localhost:$mport -4sL "https://www.netflix.com/title/70283261" 2>&1` +result5=`curl -sx socks5h://localhost:$mport -4sL "https://www.netflix.com/title/70143860" 2>&1` +result6=`curl -sx socks5h://localhost:$mport -4sL "https://www.netflix.com/title/70202589" 2>&1` +[[ "$result1" == *"page-404"* && "$result2" == *"page-404"* && "$result3" == *"page-404"* && "$result4" == *"page-404"* && "$result5" == *"page-404"* && "$result6" == *"page-404"* ]] && NF="遗憾，当前IP仅可观看Netflix自制剧" && return +NF="恭喜，当前IP支持观看Netflix非自制剧" && return +} v4v6(){ -v6=$(curl -s6m6 https://ip.gs -k) -v4=$(curl -s4m6 https://ip.gs -k) +v4=$(curl -s4m6 ip.sb -k) +v6=$(curl -s6m6 ip.sb -k) +#v6=$(curl -s6m6 api64.ipify.org -k) +#v4=$(curl -s4m6 api64.ipify.org -k) } checkwgcf(){ @@ -108,51 +165,187 @@ wgcfv6=$(curl -s6m6 https://www.cloudflare.com/cdn-cgi/trace -k | grep warp | cu wgcfv4=$(curl -s4m6 https://www.cloudflare.com/cdn-cgi/trace -k | grep warp | cut -d= -f2) } -ShowWGCF(){ -UA_Browser="Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/80.0.3987.87 Safari/537.36" +warpip(){ +checkpt2(){ +a=`cat /root/warpip/result.csv | awk -F, '$3!="timeout ms" {print} ' | sed -n '2p' | awk -F ',' '{print $2}'` +if [[ $a = 100.00% ]]; then v4v6 -isp4=`curl -s --user-agent "${UA_Browser}" https://api.ip.sb/geoip/$v4 -k | awk -F "isp" '{print $2}' | awk -F "offset" '{print $1}' | sed "s/[,\":]//g"` -isp6=`curl -s --user-agent "${UA_Browser}" https://api.ip.sb/geoip/$v6 -k | awk -F "isp" '{print $2}' | awk -F "offset" '{print $1}' | sed "s/[,\":]//g"` -warppflow=$((`grep -oP '"quota":\K\d+' <<< $(curl -s "https://api.cloudflareclient.com/v0a884/reg/$(grep 'device_id' /etc/wireguard/wgcf-account.toml 2>/dev/null | cut -d \' -f2)" -H "User-Agent: okhttp/3.12.1" -H "Authorization: Bearer $(grep 'access_token' /etc/wireguard/wgcf-account.toml 2>/dev/null | cut -d \' -f2)")`)) -flow=`echo "scale=2; $warppflow/1000000000" | bc` -[[ -e /etc/wireguard/wgcf+p.log ]] && cfplus="WARP+普通账户(有限WARP+流量：$flow GB)，设备名称：$(grep -s 'Device name' /etc/wireguard/wgcf+p.log | awk '{ print $NF }')" || cfplus="WARP+Teams账户(无限WARP+流量)" -if [[ -n $v4 ]]; then -wgcfv4=$(curl -s4 https://www.cloudflare.com/cdn-cgi/trace -k | grep warp | cut -d= -f2) -case ${wgcfv4} in -plus) -WARPIPv4Status=$(white "WARP+状态：\c" ; rred "运行中，$cfplus" ; white " 服务商 Cloudflare 获取IPV4地址：\c" ; rred "$v4 （$(./nf | awk '{print $1}' | sed -n '4p')）" ; white " 奈飞NF解锁情况：\c" ; rred "$(./nf | awk '{print $1}' | sed -n '3p')");; -on) -WARPIPv4Status=$(white "WARP状态：\c" ; green "运行中，WARP普通账户(无限WARP流量)" ; white " 服务商 Cloudflare 获取IPV4地址：\c" ; green "$v4 （$(./nf | awk '{print $1}' | sed -n '4p')）" ; white " 奈飞NF解锁情况：\c" ; green "$(./nf | awk '{print $1}' | sed -n '3p')");; -off) -WARPIPv4Status=$(white "WARP状态：\c" ; yellow "关闭中" ; white " 服务商 $isp4 获取IPV4地址：\c" ; yellow "$v4 （$(./nf | awk '{print $1}' | sed -n '4p')）" ; white " 奈飞NF解锁情况：\c" ; yellow "$(./nf | awk '{print $1}' | sed -n '3p')");; -esac +if [[ -z $v4 ]]; then +export endpoint=[2606:4700:d0::a29f:c001]:2408 else -WARPIPv4Status=$(white "IPV4状态：\c" ; red "不存在IPV4地址 ") -fi -if [[ -n $v6 ]]; then -wgcfv6=$(curl -s6 https://www.cloudflare.com/cdn-cgi/trace -k | grep warp | cut -d= -f2) -case ${wgcfv6} in -plus) -WARPIPv6Status=$(white "WARP+状态：\c" ; rred "运行中，$cfplus" ; white " 服务商 Cloudflare 获取IPV6地址：\c" ; rred "$v6 （$(./nf | awk '{print $1}' | sed -n '8p')）" ; white " 奈飞NF解锁情况：\c" ; rred "$(./nf | awk '{print $1}' | sed -n '7p')");; -on) -WARPIPv6Status=$(white "WARP状态：\c" ; green "运行中，WARP普通账户(无限WARP流量)" ; white " 服务商 Cloudflare 获取IPV6地址：\c" ; green "$v6 （$(./nf | awk '{print $1}' | sed -n '8p')）" ; white " 奈飞NF解锁情况：\c" ; green "$(./nf | awk '{print $1}' | sed -n '7p')");; -off) -WARPIPv6Status=$(white "WARP状态：\c" ; yellow "关闭中" ; white " 服务商 $isp6 获取IPV6地址：\c" ; yellow "$v6 （$(./nf | awk '{print $1}' | sed -n '8p')）" ; white " 奈飞NF解锁情况：\c" ; yellow "$(./nf | awk '{print $1}' | sed -n '7p')");; -esac +export endpoint=162.159.193.10:1701 +fi else -WARPIPv6Status=$(white "IPV6状态：\c" ; red "不存在IPV6地址 ") -fi +export endpoint=`cat /root/warpip/result.csv | awk -F, '$3!="timeout ms" {print} ' | sed -n '2p' | awk -F ',' '{print $1}'` +fi +green "脚本将自动应用本地VPS优选的warp对端IP地址：$endpoint" } - -get_char(){ -SAVEDSTTY=`stty -g` -stty -echo -stty cbreak -dd if=/dev/tty bs=1 count=1 2> /dev/null -stty -raw -stty echo -stty $SAVEDSTTY +checkpt1(){ +mkdir -p /root/warpip +if [[ ! -f '/root/warpip/result.csv' ]]; then +cpujg +v4v6 +if [[ -z $v4 ]]; then +n=0 + iplist=100 + while true + do + temp[$n]=$(echo [2606:4700:d0::$(printf '%x\n' $(($RANDOM*2+$RANDOM%2))):$(printf '%x\n' $(($RANDOM*2+$RANDOM%2))):$(printf '%x\n' $(($RANDOM*2+$RANDOM%2))):$(printf '%x\n' $(($RANDOM*2+$RANDOM%2)))]) + n=$[$n+1] + if [ $n -ge $iplist ] + then + break + fi + temp[$n]=$(echo [2606:4700:d1::$(printf '%x\n' $(($RANDOM*2+$RANDOM%2))):$(printf '%x\n' $(($RANDOM*2+$RANDOM%2))):$(printf '%x\n' $(($RANDOM*2+$RANDOM%2))):$(printf '%x\n' $(($RANDOM*2+$RANDOM%2)))]) + n=$[$n+1] + if [ $n -ge $iplist ] + then + break + fi + done + while true + do + if [ $(echo ${temp[@]} | sed -e 's/ /\n/g' | sort -u | wc -l) -ge $iplist ] + then + break + else + temp[$n]=$(echo [2606:4700:d0::$(printf '%x\n' $(($RANDOM*2+$RANDOM%2))):$(printf '%x\n' $(($RANDOM*2+$RANDOM%2))):$(printf '%x\n' $(($RANDOM*2+$RANDOM%2))):$(printf '%x\n' $(($RANDOM*2+$RANDOM%2)))]) + n=$[$n+1] + fi + if [ $(echo ${temp[@]} | sed -e 's/ /\n/g' | sort -u | wc -l) -ge $iplist ] + then + break + else + temp[$n]=$(echo [2606:4700:d1::$(printf '%x\n' $(($RANDOM*2+$RANDOM%2))):$(printf '%x\n' $(($RANDOM*2+$RANDOM%2))):$(printf '%x\n' $(($RANDOM*2+$RANDOM%2))):$(printf '%x\n' $(($RANDOM*2+$RANDOM%2)))]) + n=$[$n+1] + fi + done +else + n=0 + iplist=100 + while true + do + temp[$n]=$(echo 162.159.192.$(($RANDOM%256))) + n=$[$n+1] + if [ $n -ge $iplist ] + then + break + fi + temp[$n]=$(echo 162.159.193.$(($RANDOM%256))) + n=$[$n+1] + if [ $n -ge $iplist ] + then + break + fi + temp[$n]=$(echo 162.159.195.$(($RANDOM%256))) + n=$[$n+1] + if [ $n -ge $iplist ] + then + break + fi + temp[$n]=$(echo 188.114.96.$(($RANDOM%256))) + n=$[$n+1] + if [ $n -ge $iplist ] + then + break + fi + temp[$n]=$(echo 188.114.97.$(($RANDOM%256))) + n=$[$n+1] + if [ $n -ge $iplist ] + then + break + fi + temp[$n]=$(echo 188.114.98.$(($RANDOM%256))) + n=$[$n+1] + if [ $n -ge $iplist ] + then + break + fi + temp[$n]=$(echo 188.114.99.$(($RANDOM%256))) + n=$[$n+1] + if [ $n -ge $iplist ] + then + break + fi + done + while true + do + if [ $(echo ${temp[@]} | sed -e 's/ /\n/g' | sort -u | wc -l) -ge $iplist ] + then + break + else + temp[$n]=$(echo 162.159.192.$(($RANDOM%256))) + n=$[$n+1] + fi + if [ $(echo ${temp[@]} | sed -e 's/ /\n/g' | sort -u | wc -l) -ge $iplist ] + then + break + else + temp[$n]=$(echo 162.159.193.$(($RANDOM%256))) + n=$[$n+1] + fi + if [ $(echo ${temp[@]} | sed -e 's/ /\n/g' | sort -u | wc -l) -ge $iplist ] + then + break + else + temp[$n]=$(echo 162.159.195.$(($RANDOM%256))) + n=$[$n+1] + fi + if [ $(echo ${temp[@]} | sed -e 's/ /\n/g' | sort -u | wc -l) -ge $iplist ] + then + break + else + temp[$n]=$(echo 188.114.96.$(($RANDOM%256))) + n=$[$n+1] + fi + if [ $(echo ${temp[@]} | sed -e 's/ /\n/g' | sort -u | wc -l) -ge $iplist ] + then + break + else + temp[$n]=$(echo 188.114.97.$(($RANDOM%256))) + n=$[$n+1] + fi + if [ $(echo ${temp[@]} | sed -e 's/ /\n/g' | sort -u | wc -l) -ge $iplist ] + then + break + else + temp[$n]=$(echo 188.114.98.$(($RANDOM%256))) + n=$[$n+1] + fi + if [ $(echo ${temp[@]} | sed -e 's/ /\n/g' | sort -u | wc -l) -ge $iplist ] + then + break + else + temp[$n]=$(echo 188.114.99.$(($RANDOM%256))) + n=$[$n+1] + fi + done +fi +echo ${temp[@]} | sed -e 's/ /\n/g' | sort -u>/root/warpip/ip.txt +wget -qO /root/warpip/$cpu https://gitlab.com/rwkgyg/CFwarp/raw/main/point/$cpu && chmod +x /root/warpip/$cpu +cd /root/warpip +./$cpu >/dev/null 2>&1 & +wait +cd +checkpt2 +else +checkpt2 +fi } +checkwgcf +if [[ ! $wgcfv4 =~ on|plus && ! $wgcfv6 =~ on|plus ]]; then +checkpt1 +else +systemctl stop wg-quick@wgcf >/dev/null 2>&1 +kill -15 $(pgrep warp-go) >/dev/null 2>&1 && sleep 2 +checkpt1 +systemctl start wg-quick@wgcf >/dev/null 2>&1 +systemctl restart warp-go >/dev/null 2>&1 +systemctl enable warp-go >/dev/null 2>&1 +systemctl start warp-go >/dev/null 2>&1 +fi +} +warpip dig9(){ if [[ -n $(grep 'DiG 9' /etc/hosts) ]]; then @@ -160,36 +353,986 @@ echo -e "search blue.kundencontroller.de\noptions rotate\nnameserver 2a02:180:6: fi } -docker(){ -if [[ -n $(ip a | grep docker) ]]; then -red "检测到VPS已安装docker，如继续安装wgcf-warp，docker可能会失效" -sleep 3s -yellow "6秒后继续安装，退出安装请按Ctrl+c" -sleep 6s +mtuwarp(){ +v4v6 +yellow "开始自动设置warp的MTU最佳网络吞吐量值，以优化WARP网络！" +MTUy=1500 +MTUc=10 +if [[ -n $v6 && -z $v4 ]]; then +ping='ping6' +IP1='2606:4700:4700::1111' +IP2='2001:4860:4860::8888' +else +ping='ping' +IP1='1.1.1.1' +IP2='8.8.8.8' fi +while true; do +if ${ping} -c1 -W1 -s$((${MTUy} - 28)) -Mdo ${IP1} >/dev/null 2>&1 || ${ping} -c1 -W1 -s$((${MTUy} - 28)) -Mdo ${IP2} >/dev/null 2>&1; then +MTUc=1 +MTUy=$((${MTUy} + ${MTUc})) +else +MTUy=$((${MTUy} - ${MTUc})) +[[ ${MTUc} = 1 ]] && break +fi +[[ ${MTUy} -le 1360 ]] && MTUy='1360' && break +done +MTU=$((${MTUy} - 80)) +green "MTU最佳网络吞吐量值= $MTU 已设置完毕" } -STOPwgcf(){ -if [[ $(type -P warp-cli) ]]; then -red "已安装Socks5-WARP(+)，不支持当前选择的wgcf-warp安装方案" -systemctl restart wg-quick@wgcf ; bash CFwarp.sh +xyz(){ +if [[ -n $(screen -ls | grep '(Attached)' | awk '{print $1}' | awk -F "." '{print $1}') ]]; then +until [[ -z $(screen -ls | grep '(Attached)' | awk '{print $1}' | awk -F "." '{print $1}' | awk 'NR==1{print}') ]] +do +Attached=`screen -ls | grep '(Attached)' | awk '{print $1}' | awk -F "." '{print $1}' | awk 'NR==1{print}'` +screen -d $Attached +done +fi +if [[ -e /root/WARP-UP.sh ]]; then +screen -ls | awk '/\.up/ {print $1}' | cut -d "." -f 1 | xargs kill 2>/dev/null ; screen -UdmS up bash -c '/bin/bash /root/WARP-UP.sh' +else +green "安装warp在线监测守护进程" +cat>/root/WARP-UP.sh<<-\EOF +#!/bin/bash +red(){ echo -e "\033[31m\033[01m$1\033[0m";} +green(){ echo -e "\033[32m\033[01m$1\033[0m";} +sleep 10 +checkwgcf(){ +wgcfv6=$(curl -s6m6 https://www.cloudflare.com/cdn-cgi/trace -k | grep warp | cut -d= -f2) +wgcfv4=$(curl -s4m6 https://www.cloudflare.com/cdn-cgi/trace -k | grep warp | cut -d= -f2) +} +warpclose(){ +wg-quick down wgcf >/dev/null 2>&1;systemctl stop wg-quick@wgcf >/dev/null 2>&1;systemctl disable wg-quick@wgcf >/dev/null 2>&1;kill -15 $(pgrep warp-go) >/dev/null 2>&1;systemctl stop warp-go >/dev/null 2>&1;systemctl disable warp-go >/dev/null 2>&1 +} +warpopen(){ +wg-quick down wgcf >/dev/null 2>&1;systemctl enable wg-quick@wgcf >/dev/null 2>&1;systemctl start wg-quick@wgcf >/dev/null 2>&1;systemctl restart wg-quick@wgcf >/dev/null 2>&1;kill -15 $(pgrep warp-go) >/dev/null 2>&1;systemctl stop warp-go >/dev/null 2>&1;systemctl enable warp-go >/dev/null 2>&1;systemctl start warp-go >/dev/null 2>&1;systemctl restart warp-go >/dev/null 2>&1 +} +warpre(){ +i=0 +while [ $i -le 4 ]; do let i++ +warpopen +checkwgcf +[[ $wgcfv4 =~ on|plus || $wgcfv6 =~ on|plus ]] && green "中断后的warp尝试获取IP成功！" && break || red "中断后的warp尝试获取IP失败！" +done +checkwgcf +if [[ ! $wgcfv4 =~ on|plus && ! $wgcfv6 =~ on|plus ]]; then +warpclose +red "由于5次尝试获取warp的IP失败，现执行停止并关闭warp，VPS恢复原IP状态" fi } - -lncf(){ -if [[ $(type -P wg-quick) || $(type -P warp-cli) ]]; then -chmod +x /root/CFwarp.sh -ln -sf /root/CFwarp.sh /usr/bin/cf +while true; do +green "检测warp是否启动中…………" +wp=$(cat /root/warpip/wp.log) +if [[ $wp = w4 ]]; then +checkwgcf +[[ $wgcfv4 =~ on|plus ]] && green "恭喜！WARP IPV4状态为运行中！下轮检测将在60秒后自动执行" && sleep 60s || (warpre ; green "下轮检测将在50秒后自动执行" ; sleep 50s) +elif [[ $wp = w6 ]]; then +checkwgcf +[[ $wgcfv6 =~ on|plus ]] && green "恭喜！WARP IPV6状态为运行中！下轮检测将在60秒后自动执行" && sleep 60s || (warpre ; green "下轮检测将在50秒后自动执行" ; sleep 50s) +else +checkwgcf +[[ $wgcfv4 =~ on|plus && $wgcfv6 =~ on|plus ]] && green "恭喜！WARP IPV4+IPV6状态为运行中！下轮检测将在60秒后自动执行" && sleep 60s || (warpre ; green "下轮检测将在50秒后自动执行" ; sleep 50s) +fi +done +EOF +#readp "warp状态为运行时，重新检测warp状态间隔时间（回车默认60秒）,请输入间隔时间（例：50秒，输入50）:" stop +#[[ -n $stop ]] && sed -i "s/60s/${stop}s/g;s/60秒/${stop}秒/g" /root/WARP-UP.sh || green "默认间隔60秒" +#readp "warp状态为中断时(连续5次失败自动关闭warp)，继续检测WARP状态间隔时间（回车默认50秒）,请输入间隔时间（例：50秒，输入50）:" goon +#[[ -n $goon ]] && sed -i "s/50s/${goon}s/g;s/50秒/${goon}秒/g" /root/WARP-UP.sh || green "默认间隔50秒" +[[ -e /root/WARP-UP.sh ]] && screen -ls | awk '/\.up/ {print $1}' | cut -d "." -f 1 | xargs kill 2>/dev/null ; screen -UdmS up bash -c '/bin/bash /root/WARP-UP.sh' fi } first4(){ checkwgcf if [[ $wgcfv4 =~ on|plus && -z $wgcfv6 ]]; then -[[ -n /etc/gai.conf ]] && grep -qE '^ *precedence ::ffff:0:0/96 100' /etc/gai.conf || echo 'precedence ::ffff:0:0/96 100' >> /etc/gai.conf -sed -i '/^label 2002::\/16 2/d' /etc/gai.conf +[[ -e /etc/gai.conf ]] && grep -qE '^ *precedence ::ffff:0:0/96 100' /etc/gai.conf || echo 'precedence ::ffff:0:0/96 100' >> /etc/gai.conf 2>/dev/null +sed -i '/^label 2002::\/16 2/d' /etc/gai.conf 2>/dev/null else -sed -i '/^precedence ::ffff:0:0\/96 100/d;/^label 2002::\/16 2/d' /etc/gai.conf +sed -i '/^precedence ::ffff:0:0\/96 100/d;/^label 2002::\/16 2/d' /etc/gai.conf 2>/dev/null +fi +} + +docker(){ +if [[ -n $(ip a | grep docker) ]]; then +red "检测到VPS已安装docker，如继续安装方案一的WARP，docker就会失效" +red "为避免docker失效，建议使用方案二或者方案三" +sleep 3s +yellow "6秒后继续安装方案一的WARP，退出安装请按Ctrl+c" +sleep 6s +fi +} + +uncf(){ +if [[ -z $(type -P warp-go) && -z $(type -P wg-quick) && -z $(type -P warp-cli) ]]; then +rm -rf /root/CFwarp.sh /usr/bin/cf +fi +} + +upcfwarp(){ +wget -N https://gitlab.com/rwkgyg/CFwarp/raw/main/CFwarp.sh +chmod +x /root/CFwarp.sh +ln -sf /root/CFwarp.sh /usr/bin/cf +green "CFwarp安装脚本升级成功" && cf +} + +cso(){ +warp-cli --accept-tos disconnect >/dev/null 2>&1 +warp-cli --accept-tos disable-always-on >/dev/null 2>&1 +warp-cli --accept-tos delete >/dev/null 2>&1 +if [[ $release = Centos ]]; then +yum autoremove cloudflare-warp -y +else +apt purge cloudflare-warp -y +rm -f /etc/apt/sources.list.d/cloudflare-client.list /usr/share/keyrings/cloudflare-warp-archive-keyring.gpg +fi +$yumapt autoremove +} + +lncf(){ +if [[ -n $(type -P warp-go) || -n $(type -P warp-cli) || -n $(type -P wg-quick) ]]; then +chmod +x /root/CFwarp.sh +ln -sf /root/CFwarp.sh /usr/bin/cf +fi +} + +WARPtools(){ +green "1. 查看WARP在线监测情况（注意，退出命令：ctrl+a+d ）" +green "2. 重启WARP在线监测功能" +green "3. 刷warp+流量" +readp "请选择：" warptools +if [[ $warptools == 1 ]]; then +name=`screen -ls | grep '(Detached)' | awk '{print $1}' | awk -F "." '{print $2}'` +if [[ $name =~ "up" ]]; then +screen -Ur up +else +red "未启动WARP监测功能，请选择 2 重启" && WARPtools +fi +elif [[ $warptools == 2 ]]; then +xyz +name=`screen -ls | grep '(Detached)' | awk '{print $1}' | awk -F "." '{print $2}'` +[[ $name =~ "up" ]] && green "WARP在线监测启动成功" || red "WARP在线监测启动失败，查看screen是否安装成功" +elif [[ $warptools == 3 ]]; then +wget -N https://gitlab.com/rwkgyg/CFwarp/raw/main/wp-plus.py +sed -i "27 s/[(][^)]*[)]//g" wp-plus.py +readp "客户端配置ID(36个字符)：" ID +sed -i "27 s/input/'$ID'/" wp-plus.py +python3 wp-plus.py +else +WARPtools +fi +} + +ShowSOCKS5(){ +if [[ $(systemctl is-active warp-svc) = active ]]; then +mport=`warp-cli --accept-tos settings 2>/dev/null | grep 'WarpProxy on port' | awk -F "port " '{print $2}'` +s5ip=`curl -sx socks5h://localhost:$mport ip.sb -k` +nfs5 +#NF=$(./nf -proxy socks5h://localhost:$mport | awk '{print $1}' | sed -n '3p') +[[ $(curl -sx socks5h://localhost:$mport https://chat.openai.com/ -I | grep "text/plain") != "" ]] && chat='遗憾，当前IP无法访问ChatGPT官网服务' || chat='恭喜，当前IP支持访问ChatGPT官网服务' +isp4a=`curl -sx socks5h://localhost:$mport --user-agent "${UA_Browser}" http://ip-api.com/json/$v4?lang=zh-CN -k | cut -f13 -d ":" | cut -f2 -d '"'` +isp4b=`curl -sx socks5h://localhost:$mport --user-agent "${UA_Browser}" https://api.ip.sb/geoip/$v4 -k | awk -F "isp" '{print $2}' | awk -F "offset" '{print $1}' | sed "s/[,\":]//g"` +[[ -n $isp4a ]] && isp4=$isp4a || isp4=$isp4b +nonf=$(curl -sx socks5h://localhost:$mport --user-agent "${UA_Browser}" http://ip-api.com/json/$v4?lang=zh-CN -k | cut -f2 -d"," | cut -f4 -d '"') +#sunf=$(./nf | awk '{print $1}' | sed -n '4p') +#snnf=$(curl -sx socks5h://localhost:$mport ip.p3terx.com -k | sed -n 2p | awk '{print $3}') +country=$nonf +socks5=$(curl -sx socks5h://localhost:$mport www.cloudflare.com/cdn-cgi/trace -k --connect-timeout 2 | grep warp | cut -d= -f2) +case ${socks5} in +plus) +S5Status=$(white "Socks5 WARP+状态：\c" ; rred "运行中，WARP+普通账户(剩余WARP+流量:$((`warp-cli --accept-tos account | grep Quota | awk '{ print $(NF) }'`/1000000000))GiB)" ; white " Socks5 端口：\c" ; rred "$mport" ; white " 服务商 Cloudflare 获取IPV4地址：\c" ; rred "$s5ip $country" ; white " 奈飞NF解锁情况：\c" ; rred "$NF" ; white " ChatGPT解锁情况：\c" ; rred "$chat");; +on) +S5Status=$(white "Socks5 WARP状态：\c" ; green "运行中，WARP普通账户(无限WARP流量)" ; white " Socks5 端口：\c" ; green "$mport" ; white " 服务商 Cloudflare 获取IPV4地址：\c" ; green "$s5ip $country" ; white " 奈飞NF解锁情况：\c" ; green "$NF" ; white " ChatGPT解锁情况：\c" ; green "$chat");; +*) +S5Status=$(white "Socks5 WARP状态：\c" ; yellow "已安装Socks5-WARP客户端，但端口处于关闭状态") +esac +else +S5Status=$(white "Socks5 WARP状态：\c" ; red "未安装Socks5-WARP客户端") +fi +} + +SOCKS5ins(){ +yellow "检测Socks5-WARP安装环境中……" +if [[ $release = Centos ]]; then +[[ ! ${vsid} =~ 8 ]] && yellow "当前系统版本号：Centos $vsid \nSocks5-WARP仅支持Centos 8 " && bash CFwarp.sh +elif [[ $release = Ubuntu ]]; then +[[ ! ${vsid} =~ 16|18|20|22 ]] && yellow "当前系统版本号：Ubuntu $vsid \nSocks5-WARP仅支持 Ubuntu 16.04/18.04/20.04/22.04系统 " && bash CFwarp.sh +elif [[ $release = Debian ]]; then +[[ ! ${vsid} =~ 9|10|11 ]] && yellow "当前系统版本号：Debian $vsid \nSocks5-WARP仅支持 Debian 9/10/11系统 " && bash CFwarp.sh +fi +[[ $(warp-cli --accept-tos status 2>/dev/null) =~ 'Connected' ]] && red "当前Socks5-WARP已经在运行中" && bash CFwarp.sh + +systemctl stop wg-quick@wgcf >/dev/null 2>&1 +kill -15 $(pgrep warp-go) >/dev/null 2>&1 && sleep 2 +v4v6 +if [[ -n $v6 && -z $v4 ]]; then +systemctl start wg-quick@wgcf >/dev/null 2>&1 +systemctl restart warp-go >/dev/null 2>&1 +systemctl enable warp-go >/dev/null 2>&1 +systemctl start warp-go >/dev/null 2>&1 +red "纯IPV6的VPS目前不支持安装Socks5-WARP" && sleep 2 && bash CFwarp.sh +else +systemctl restart warp-go >/dev/null 2>&1 +systemctl enable warp-go >/dev/null 2>&1 +systemctl start warp-go >/dev/null 2>&1 +#elif [[ -n $v4 && -z $v6 ]]; then +#systemctl start wg-quick@wgcf >/dev/null 2>&1 +#checkwgcf +#[[ $wgcfv4 =~ on|plus ]] && red "纯IPV4的VPS已安装Wgcf-WARP-IPV4，不支持安装Socks5-WARP" && bash CFwarp.sh +#elif [[ -n $v4 && -n $v6 ]]; then +#systemctl start wg-quick@wgcf >/dev/null 2>&1 +#checkwgcf +#[[ $wgcfv4 =~ on|plus || $wgcfv6 =~ on|plus ]] && red "原生双栈VPS已安装Wgcf-WARP-IPV4/IPV6，请先卸载。然后安装Socks5-WARP，最后安装Wgcf-WARP-IPV4/IPV6" && bash CFwarp.sh +fi +#systemctl start wg-quick@wgcf >/dev/null 2>&1 +#checkwgcf +#if [[ $wgcfv4 =~ on|plus && $wgcfv6 =~ on|plus ]]; then +#red "已安装Wgcf-WARP-IPV4+IPV6，不支持安装Socks5-WARP" && bash CFwarp.sh +#fi +if [[ $release = Centos ]]; then +if [[ ${vsid} =~ 8 ]]; then +cd /etc/yum.repos.d/ && mkdir backup && mv *repo backup/ +curl -o /etc/yum.repos.d/CentOS-Base.repo http://mirrors.aliyun.com/repo/Centos-8.repo +sed -i -e "s|mirrors.cloud.aliyuncs.com|mirrors.aliyun.com|g " /etc/yum.repos.d/CentOS-* +sed -i -e "s|releasever|releasever-stream|g" /etc/yum.repos.d/CentOS-* +yum clean all && yum makecache +fi +yum -y install epel-release && yum -y install net-tools +rpm -ivh https://pkg.cloudflareclient.com/cloudflare-release-el8.rpm +yum -y install cloudflare-warp +fi +if [[ $release = Debian ]]; then +[[ ! $(type -P gpg) ]] && apt update && apt install gnupg -y +[[ ! $(apt list 2>/dev/null | grep apt-transport-https | grep installed) ]] && apt update && apt install apt-transport-https -y +fi +if [[ $release != Centos ]]; then +apt install net-tools -y +curl https://pkg.cloudflareclient.com/pubkey.gpg | gpg --yes --dearmor --output /usr/share/keyrings/cloudflare-warp-archive-keyring.gpg +echo "deb [arch=amd64 signed-by=/usr/share/keyrings/cloudflare-warp-archive-keyring.gpg] http://pkg.cloudflareclient.com/ $(lsb_release -sc) main" | tee /etc/apt/sources.list.d/cloudflare-client.list +apt update;apt install cloudflare-warp -y +fi +warpip +warp-cli --accept-tos register >/dev/null 2>&1 && sleep 2 +warp-cli --accept-tos set-mode proxy >/dev/null 2>&1 +warp-cli --accept-tos set-custom-endpoint "$endpoint" >/dev/null 2>&1 +warp-cli --accept-tos enable-always-on >/dev/null 2>&1 +sleep 2 && ShowSOCKS5 && S5menu && lncf && reswarp +} + +WGCFmenu(){ +name=`screen -ls | grep '(Detached)' | awk '{print $1}' | awk -F "." '{print $2}'` +[[ $name =~ "up" ]] && keepup="WARP监测已开启" || keepup="WARP监测关闭中" +white "------------------------------------------------------------------------------------" +white " 方案一：当前 IPV4 接管出站流量情况如下（$keepup）" +white " ${WARPIPv4Status}" +white "------------------------------------------------------------------------------------" +white " 方案一：当前 IPV6 接管出站流量情况如下（$keepup）" +white " ${WARPIPv6Status}" +white "------------------------------------------------------------------------------------" +} +S5menu(){ +white "------------------------------------------------------------------------------------------------" +white " 方案二：当前Socks5-WARP官方客户端本地代理情况如下" +blue " ${S5Status}" +white "------------------------------------------------------------------------------------------------" +} + +IP_Status_menu(){ +WGCFmenu;S5menu +} + +reswarp(){ +crontab -l > /tmp/crontab.tmp +echo "0 4 * * * systemctl stop warp-go;systemctl restart warp-go;systemctl restart wg-quick@wgcf;systemctl restart warp-svc" >> /tmp/crontab.tmp +echo "@reboot screen -UdmS up /bin/bash /root/WARP-UP.sh" >> /tmp/crontab.tmp +crontab /tmp/crontab.tmp +rm /tmp/crontab.tmp +} + +unreswarp(){ +crontab -l > /tmp/crontab.tmp +sed -i '/systemctl stop warp-go;systemctl restart warp-go;systemctl restart wg-quick@wgcf;systemctl restart warp-svc/d' /tmp/crontab.tmp +sed -i '/@reboot screen/d' /tmp/crontab.tmp +crontab /tmp/crontab.tmp +rm /tmp/crontab.tmp +} + +ONEWARPGO(){ +yellow "\n 请稍等……" && sleep 2 +STOPwgcf(){ +if [[ -n $(type -P warp-cli) ]]; then +red "已安装Socks5-WARP，不支持当前选择的WARP安装方案" +systemctl restart warp-go ; bash CFwarp.sh +fi +} + +ShowWGCF(){ +UA_Browser="Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/80.0.3987.87 Safari/537.36" +v4v6 +warppflow=$((`grep -oP '"quota":\K\d+' <<< $(curl -sm4 "https://api.cloudflareclient.com/v0a884/reg/$(grep 'Device' /usr/local/bin/warp.conf 2>/dev/null | cut -d= -f2 | sed 's# ##g')" -H "User-Agent: okhttp/3.12.1" -H "Authorization: Bearer $(grep 'Token' /usr/local/bin/warp.conf 2>/dev/null | cut -d= -f2 | sed 's# ##g')")`)) +flow=`echo "scale=2; $warppflow/1000000000" | bc` +[[ -e /usr/local/bin/warpplus.log ]] && cfplus="WARP+普通账户(有限WARP+流量：$flow GB)，设备名称：$(sed -n 1p /usr/local/bin/warpplus.log)" || cfplus="WARP+Teams账户(无限WARP+流量)" +if [[ -n $v4 ]]; then +nf4 +[[ $(curl -s4S https://chat.openai.com/ -I | grep "text/plain") != "" ]] && chat='遗憾，当前IP无法访问ChatGPT官网服务' || chat='恭喜，当前IP支持访问ChatGPT官网服务' +wgcfv4=$(curl -s4 https://www.cloudflare.com/cdn-cgi/trace -k | grep warp | cut -d= -f2) +isp4a=`curl -sm6 --user-agent "${UA_Browser}" http://ip-api.com/json/$v4?lang=zh-CN -k | cut -f13 -d ":" | cut -f2 -d '"'` +isp4b=`curl -sm6 --user-agent "${UA_Browser}" https://api.ip.sb/geoip/$v4 -k | awk -F "isp" '{print $2}' | awk -F "offset" '{print $1}' | sed "s/[,\":]//g"` +[[ -n $isp4a ]] && isp4=$isp4a || isp4=$isp4b +nonf=$(curl -sm6 --user-agent "${UA_Browser}" http://ip-api.com/json/$v4?lang=zh-CN -k | cut -f2 -d"," | cut -f4 -d '"') +#sunf=$(./nf | awk '{print $1}' | sed -n '4p') +#snnf=$(curl -s4m6 ip.p3terx.com -k | sed -n 2p | awk '{print $3}') +country=$nonf +case ${wgcfv4} in +plus) +WARPIPv4Status=$(white "WARP+状态：\c" ; rred "运行中，$cfplus" ; white " 服务商 Cloudflare 获取IPV4地址：\c" ; rred "$v4 $country" ; white " 奈飞NF解锁情况：\c" ; rred "$NF" ; white " ChatGPT解锁情况：\c" ; rred "$chat");; +on) +WARPIPv4Status=$(white "WARP状态：\c" ; green "运行中，WARP普通账户(无限WARP流量)" ; white " 服务商 Cloudflare 获取IPV4地址：\c" ; green "$v4 $country" ; white " 奈飞NF解锁情况：\c" ; green "$NF" ; white " ChatGPT解锁情况：\c" ; green "$chat");; +off) +WARPIPv4Status=$(white "WARP状态：\c" ; yellow "关闭中" ; white " 服务商 $isp4 获取IPV4地址：\c" ; yellow "$v4 $country" ; white " 奈飞NF解锁情况：\c" ; yellow "$NF" ; white " ChatGPT解锁情况：\c" ; yellow "$chat");; +esac +else +WARPIPv4Status=$(white "IPV4状态：\c" ; red "不存在IPV4地址 ") +fi +if [[ -n $v6 ]]; then +nf6 +[[ $(curl -s6S https://chat.openai.com/ -I | grep "text/plain") != "" ]] && chat='遗憾，当前IP无法访问ChatGPT官网服务' || chat='恭喜，当前IP支持访问ChatGPT官网服务' +wgcfv6=$(curl -s6 https://www.cloudflare.com/cdn-cgi/trace -k | grep warp | cut -d= -f2) +isp6a=`curl -sm6 --user-agent "${UA_Browser}" http://ip-api.com/json/$v6?lang=zh-CN -k | cut -f13 -d":" | cut -f2 -d '"'` +isp6b=`curl -sm6 --user-agent "${UA_Browser}" https://api.ip.sb/geoip/$v6 -k | awk -F "isp" '{print $2}' | awk -F "offset" '{print $1}' | sed "s/[,\":]//g"` +[[ -n $isp6a ]] && isp6=$isp6a || isp6=$isp6b +nonf=$(curl -sm6 --user-agent "${UA_Browser}" http://ip-api.com/json/$v6?lang=zh-CN -k | cut -f2 -d"," | cut -f4 -d '"') +#sunf=$(./nf | awk '{print $1}' | sed -n '8p') +#snnf=$(curl -s6m6 ip.p3terx.com -k | sed -n 2p | awk '{print $3}') +country=$nonf +case ${wgcfv6} in +plus) +WARPIPv6Status=$(white "WARP+状态：\c" ; rred "运行中，$cfplus" ; white " 服务商 Cloudflare 获取IPV6地址：\c" ; rred "$v6 $country" ; white " 奈飞NF解锁情况：\c" ; rred "$NF" ; white " ChatGPT解锁情况：\c" ; rred "$chat");; +on) +WARPIPv6Status=$(white "WARP状态：\c" ; green "运行中，WARP普通账户(无限WARP流量)" ; white " 服务商 Cloudflare 获取IPV6地址：\c" ; green "$v6 $country" ; white " 奈飞NF解锁情况：\c" ; green "$NF" ; white " ChatGPT解锁情况：\c" ; green "$chat");; +off) +WARPIPv6Status=$(white "WARP状态：\c" ; yellow "关闭中" ; white " 服务商 $isp6 获取IPV6地址：\c" ; yellow "$v6 $country" ; white " 奈飞NF解锁情况：\c" ; yellow "$NF" ; white " ChatGPT解锁情况：\c" ; yellow "$chat");; +esac +else +WARPIPv6Status=$(white "IPV6状态：\c" ; red "不存在IPV6地址 ") +fi +} + +wgo1='sed -i "s#.*AllowedIPs.*#AllowedIPs = 0.0.0.0/0#g" /usr/local/bin/warp.conf' +wgo2='sed -i "s#.*AllowedIPs.*#AllowedIPs = ::/0#g" /usr/local/bin/warp.conf' +wgo3='sed -i "s#.*AllowedIPs.*#AllowedIPs = 0.0.0.0/0,::/0#g" /usr/local/bin/warp.conf' +wgo4="sed -i "/Endpoint6/d" /usr/local/bin/warp.conf && sed -i "s/162.159.*/$endpoint/g" /usr/local/bin/warp.conf" +wgo5="sed -i "/Endpoint6/d" /usr/local/bin/warp.conf && sed -i "s/162.159.*/$endpoint/g" /usr/local/bin/warp.conf" +wgo6='sed -i "20 s/^/PostUp = ip -4 rule add from $(ip route get 162.159.192.1 | grep -oP "src \K\S+") lookup main\n/" /usr/local/bin/warp.conf && sed -i "20 s/^/PostDown = ip -4 rule delete from $(ip route get 162.159.192.1 | grep -oP "src \K\S+") lookup main\n/" /usr/local/bin/warp.conf' +wgo7='sed -i "20 s/^/PostUp = ip -6 rule add from $(ip route get 2606:4700:d0::a29f:c001 | grep -oP "src \K\S+") lookup main\n/" /usr/local/bin/warp.conf && sed -i "20 s/^/PostDown = ip -6 rule delete from $(ip route get 2606:4700:d0::a29f:c001 | grep -oP "src \K\S+") lookup main\n/" /usr/local/bin/warp.conf' +wgo8='sed -i "20 s/^/PostUp = ip -4 rule add from $(ip route get 162.159.192.1 | grep -oP "src \K\S+") lookup main\n/" /usr/local/bin/warp.conf && sed -i "20 s/^/PostDown = ip -4 rule delete from $(ip route get 162.159.192.1 | grep -oP "src \K\S+") lookup main\n/" /usr/local/bin/warp.conf && sed -i "20 s/^/PostUp = ip -6 rule add from $(ip route get 2606:4700:d0::a29f:c001 | grep -oP "src \K\S+") lookup main\n/" /usr/local/bin/warp.conf && sed -i "20 s/^/PostDown = ip -6 rule delete from $(ip route get 2606:4700:d0::a29f:c001 | grep -oP "src \K\S+") lookup main\n/" /usr/local/bin/warp.conf' + +CheckWARP(){ +i=0 +while [ $i -le 9 ]; do let i++ +yellow "共执行10次，第$i次获取warp的IP中……" +kill -15 $(pgrep warp-go) >/dev/null 2>&1 && sleep 2 +systemctl restart warp-go +systemctl enable warp-go +systemctl start warp-go +checkwgcf +if [[ $wgcfv4 =~ on|plus || $wgcfv6 =~ on|plus ]]; then +green "恭喜！warp的IP获取成功！" && dns +break +else +red "遗憾！warp的IP获取失败" +fi +done +if [[ ! $wgcfv4 =~ on|plus && ! $wgcfv6 =~ on|plus ]]; then +red "安装WARP失败，还原VPS，卸载WARP" +cwg && rm -rf /root/warpip +echo +[[ $release = Centos && ${vsid} -lt 7 ]] && yellow "当前系统版本号：Centos $vsid \n建议使用 Centos 7 以上系统 " +[[ $release = Ubuntu && ${vsid} -lt 18 ]] && yellow "当前系统版本号：Ubuntu $vsid \n建议使用 Ubuntu 18 以上系统 " +[[ $release = Debian && ${vsid} -lt 10 ]] && yellow "当前系统版本号：Debian $vsid \n建议使用 Debian 10 以上系统 " +red "你或许可以使用方案二或方案三来实现WARP" +red "也可以选择WGCF核心来安装WARP方案一" +exit +else +green "ok" && systemctl restart warp-go +fi +} + +nat4(){ +[[ -n $(ip route get 1.1.1.1 2>/dev/null | grep -oP 'src \K\S+') ]] && wpgo4=$wgo6 || wpgo4=echo +} + +WGCFv4(){ +yellow "稍等3秒，检测VPS内warp环境" +docker && checkwgcf +if [[ ! $wgcfv4 =~ on|plus && ! $wgcfv6 =~ on|plus ]]; then +v4v6 +if [[ -n $v4 && -n $v6 ]]; then +green "当前原生v4+v6双栈vps首次安装warp\n现添加WARP IPV4（IP出站表现：原生 IPV6 + WARP IPV4）" && sleep 2 +wpgo1=$wgo1 && wpgo2=$wgo4 && wpgo3=$wgo8 && WGCFins +fi +if [[ -n $v6 && -z $v4 ]]; then +green "当前原生v6单栈vps首次安装warp\n现添加WARP IPV4（IP出站表现：原生 IPV6 + WARP IPV4）" && sleep 2 +wpgo1=$wgo1 && wpgo2=$wgo5 && wpgo3=$wgo7 && nat4 && WGCFins +fi +if [[ -z $v6 && -n $v4 ]]; then +green "当前原生v4单栈vps首次安装warp\n现添加WARP IPV4（IP出站表现：仅WARP IPV4）" && sleep 2 +wpgo1=$wgo1 && wpgo2=$wgo4 && wpgo3=$wgo6 && WGCFins +fi +echo 'w4' > /root/warpip/wp.log +first4 +else +kill -15 $(pgrep warp-go) >/dev/null 2>&1 +sleep 2 && v4v6 +if [[ -n $v4 && -n $v6 ]]; then +green "当前原生v4+v6双栈vps已安装warp\n现快速切换WARP IPV4（IP出站表现：原生 IPV6 + WARP IPV4）" && sleep 2 +wpgo1=$wgo1 && wpgo2=$wgo4 && wpgo3=$wgo8 && ABC +fi +if [[ -n $v6 && -z $v4 ]]; then +green "当前原生v6单栈vps已安装warp\n现快速切换WARP IPV4（IP出站表现：原生 IPV6 + WARP IPV4）" && sleep 2 +wpgo1=$wgo1 && wpgo2=$wgo5 && wpgo3=$wgo7 && nat4 && ABC +fi +if [[ -z $v6 && -n $v4 ]]; then +green "当前原生v4单栈vps已安装warp\n现快速切换WARP IPV4（IP出站表现：仅WARP IPV4）" && sleep 2 +wpgo1=$wgo1 && wpgo2=$wgo4 && wpgo3=$wgo6 && ABC +fi +echo 'w4' > /root/warpip/wp.log +CheckWARP && first4 && ShowWGCF && WGCFmenu +fi +} + +WGCFv6(){ +yellow "稍等3秒，检测VPS内warp环境" +docker && checkwgcf +if [[ ! $wgcfv4 =~ on|plus && ! $wgcfv6 =~ on|plus ]]; then +v4v6 +if [[ -n $v4 && -n $v6 ]]; then +green "当前原生v4+v6双栈vps首次安装warp\n现添加WARP IPV6（IP出站表现：原生 IPV4 + WARP IPV6）" && sleep 2 +wpgo1=$wgo2 && wpgo2=$wgo4 && wpgo3=$wgo8 && WGCFins +fi +if [[ -n $v6 && -z $v4 ]]; then +green "当前原生v6单栈vps首次安装warp\n现添加WARP IPV6（IP出站表现：仅WARP IPV6）" && sleep 2 +wpgo1=$wgo2 && wpgo2=$wgo5 && wpgo3=$wgo7 && nat4 && WGCFins +fi +if [[ -z $v6 && -n $v4 ]]; then +green "当前原生v4单栈vps首次安装warp\n现添加WARP IPV6（IP出站表现：原生 IPV4 + WARP IPV6）" && sleep 2 +wpgo1=$wgo2 && wpgo2=$wgo4 && wpgo3=$wgo6 && WGCFins +fi +echo 'w6' > /root/warpip/wp.log +else +kill -15 $(pgrep warp-go) >/dev/null 2>&1 +sleep 2 && v4v6 +if [[ -n $v4 && -n $v6 ]]; then +green "当前原生v4+v6双栈vps已安装warp\n现快速切换WARP IPV6（IP出站表现：原生 IPV4 + WARP IPV6）" && sleep 2 +wpgo1=$wgo2 && wpgo2=$wgo4 && wpgo3=$wgo8 && ABC +fi +if [[ -n $v6 && -z $v4 ]]; then +green "当前原生v6单栈vps已安装warp\n现快速切换WARP IPV6（IP出站表现：仅WARP IPV6）" && sleep 2 +wpgo1=$wgo2 && wpgo2=$wgo5 && wpgo3=$wgo7 && nat4 && ABC +fi +if [[ -z $v6 && -n $v4 ]]; then +green "当前原生v4单栈vps已安装warp\n现快速切换WARP IPV6（IP出站表现：原生 IPV4 + WARP IPV6）" && sleep 2 +wpgo1=$wgo2 && wpgo2=$wgo4 && wpgo3=$wgo6 && ABC +fi +echo 'w6' > /root/warpip/wp.log +CheckWARP && first4 && ShowWGCF && WGCFmenu +fi +} + +WGCFv4v6(){ +yellow "稍等3秒，检测VPS内warp环境" +docker && checkwgcf +if [[ ! $wgcfv4 =~ on|plus && ! $wgcfv6 =~ on|plus ]]; then +v4v6 +if [[ -n $v4 && -n $v6 ]]; then +green "当前原生v4+v6双栈vps首次安装warp\n现添加WARP IPV4+IPV6（IP出站表现：WARP双栈 IPV4 + IPV6）" && sleep 2 +wpgo1=$wgo3 && wpgo2=$wgo4 && wpgo3=$wgo8 && WGCFins +fi +if [[ -n $v6 && -z $v4 ]]; then +green "当前原生v6单栈vps首次安装warp\n现添加WARP IPV4+IPV6（IP出站表现：WARP双栈 IPV4 + IPV6）" && sleep 2 +wpgo1=$wgo3 && wpgo2=$wgo5 && wpgo3=$wgo7 && nat4 && WGCFins +fi +if [[ -z $v6 && -n $v4 ]]; then +green "当前原生v4单栈vps首次安装warp\n现添加WARP IPV4+IPV6（IP出站表现：WARP双栈 IPV4 + IPV6）" && sleep 2 +wpgo1=$wgo3 && wpgo2=$wgo4 && wpgo3=$wgo6 && WGCFins +fi +echo 'w64' > /root/warpip/wp.log +else +kill -15 $(pgrep warp-go) >/dev/null 2>&1 +sleep 2 && v4v6 +if [[ -n $v4 && -n $v6 ]]; then +green "当前原生v4+v6双栈vps已安装warp\n现快速切换WARP IPV4+IPV6（IP出站表现：WARP双栈 IPV4 + IPV6）" && sleep 2 +wpgo1=$wgo3 && wpgo2=$wgo4 && wpgo3=$wgo8 && ABC +fi +if [[ -n $v6 && -z $v4 ]]; then +green "当前原生v6单栈vps已安装warp\n现快速切换WARP IPV4+IPV6（IP出站表现：WARP双栈 IPV4 + IPV6）" && sleep 2 +wpgo1=$wgo3 && wpgo2=$wgo5 && wpgo3=$wgo7 && nat4 && ABC +fi +if [[ -z $v6 && -n $v4 ]]; then +green "当前原生v4单栈vps已安装warp\n现快速切换WARP IPV4+IPV6（IP出站表现：WARP双栈 IPV4 + IPV6）" && sleep 2 +wpgo1=$wgo3 && wpgo2=$wgo4 && wpgo3=$wgo6 && ABC +fi +echo 'w64' > /root/warpip/wp.log +CheckWARP && first4 && ShowWGCF && WGCFmenu +fi +} + +ABC(){ +echo $wpgo1 | sh +echo $wpgo2 | sh +echo $wpgo3 | sh +echo $wpgo4 | sh +} + +dns(){ +if [[ ! -f /etc/resolv.conf.bak ]]; then +mv /etc/resolv.conf /etc/resolv.conf.bak +rm -rf /etc/resolv.conf +cp -f /etc/resolv.conf.bak /etc/resolv.conf +chattr +i /etc/resolv.conf >/dev/null 2>&1 +else +chattr +i /etc/resolv.conf >/dev/null 2>&1 +fi +} + +WGCFins(){ +if [[ $release = Centos ]]; then +if [[ ${vsid} =~ 8 ]]; then +cd /etc/yum.repos.d/ && mkdir backup && mv *repo backup/ +curl -o /etc/yum.repos.d/CentOS-Base.repo http://mirrors.aliyun.com/repo/Centos-8.repo +sed -i -e "s|mirrors.cloud.aliyuncs.com|mirrors.aliyun.com|g " /etc/yum.repos.d/CentOS-* +sed -i -e "s|releasever|releasever-stream|g" /etc/yum.repos.d/CentOS-* +yum clean all && yum makecache +fi +yum install epel-release -y;yum install iproute iputils-ping -y +elif [[ $release = Debian ]]; then +apt install lsb-release -y +echo "deb http://deb.debian.org/debian $(lsb_release -sc)-backports main" | tee /etc/apt/sources.list.d/backports.list +apt update -y;apt install iproute2 openresolv dnsutils iputils-ping -y +elif [[ $release = Ubuntu ]]; then +apt update -y;apt install iproute2 openresolv dnsutils iputils-ping -y +fi +wget -N https://gitlab.com/rwkgyg/CFwarp/-/raw/main/warp-go_1.0.8_linux_${cpu} -O /usr/local/bin/warp-go && chmod +x /usr/local/bin/warp-go +until [[ -e /usr/local/bin/warp.conf ]]; do +yellow "正在申请WARP普通账户，请稍等" && sleep 1 +/usr/local/bin/warp-go --register --config=/usr/local/bin/warp.conf >/dev/null 2>&1 +done +mtuwarp +sed -i "s/MTU.*/MTU = $MTU/g" /usr/local/bin/warp.conf +cat > /lib/systemd/system/warp-go.service << EOF +[Unit] +Description=warp-go service +After=network.target +Documentation=https://gitlab.com/ProjectWARP/warp-go +[Service] +WorkingDirectory=/root/ +ExecStart=/usr/local/bin/warp-go --config=/usr/local/bin/warp.conf +Environment="LOG_LEVEL=verbose" +RemainAfterExit=yes +Restart=always +[Install] +WantedBy=multi-user.target +EOF +ABC +warpip +systemctl daemon-reload +systemctl enable warp-go +systemctl start warp-go +kill -15 $(pgrep warp-go) >/dev/null 2>&1 && sleep 2 +systemctl restart warp-go +systemctl enable warp-go +systemctl start warp-go +checkwgcf +if [[ $wgcfv4 =~ on|plus || $wgcfv6 =~ on|plus ]]; then +green "恭喜！warp的IP获取成功！" && dns +else +CheckWARP +fi +ShowWGCF && xyz && WGCFmenu && lncf && reswarp +} + +warpinscha(){ +yellow "提示：VPS的本地出站IP将被你选择的warp的IP所接管，如VPS本地无该出站IP，则被另外生成warp的IP所接管" +echo +yellow "如果你什么都不懂，回车便是！！！" +echo +green "1. 安装/切换WARP单栈IPV4（回车默认）" +green "2. 安装/切换WARP单栈IPV6" +green "3. 安装/切换WARP双栈IPV4+IPV6" +readp "\n请选择：" wgcfwarp +if [ -z "${wgcfwarp}" ] || [ $wgcfwarp == "1" ];then +WGCFv4 +elif [ $wgcfwarp == "2" ];then +WGCFv6 +elif [ $wgcfwarp == "3" ];then +WGCFv4v6 +else +red "输入错误，请重新选择" && warpinscha +fi +echo +} + +WARPup(){ +endpost(){ +kill -15 $(pgrep warp-go) >/dev/null 2>&1 && sleep 2 +v4v6 +allowips=$(cat /usr/local/bin/warp.conf | grep AllowedIPs) +if [[ -n $v4 && -n $v6 ]]; then +endpoint=$wgo4 +post=$wgo8 +elif [[ -n $v6 && -z $v4 ]]; then +endpoint=$wgo5 +[[ -n $(ip route get 1.1.1.1 2>/dev/null | grep -oP 'src \K\S+') ]] && post=$wgo8 || post=$wgo7 +elif [[ -z $v6 && -n $v4 ]]; then +endpoint=$wgo4 +post=$wgo6 +fi +} + +freewarp(){ +endpost +red "当前执行：申请WARP普通账户" +rm -rf /usr/local/bin/warp.conf /usr/local/bin/warp.conf.bak /usr/local/bin/warpplus.log +until [[ -e /usr/local/bin/warp.conf ]]; do +yellow "正在申请WARP普通账户，请稍等" && sleep 1 +/usr/local/bin/warp-go --register --config=/usr/local/bin/warp.conf +mtuwarp +sed -i "s/MTU.*/MTU = $MTU/g" /usr/local/bin/warp.conf +done +sed -i "s#.*AllowedIPs.*#$allowips#g" /usr/local/bin/warp.conf +echo $endpoint | sh +echo $post | sh +kill -15 $(pgrep warp-go) >/dev/null 2>&1 && sleep 2 +systemctl restart warp-go +systemctl enable warp-go +systemctl start warp-go +CheckWARP && ShowWGCF && WGCFmenu +} + +[[ ! $(type -P warp-go) ]] && red "未安装WARP" && bash CFwarp.sh +green "1. WARP普通账户（无限流量）" +green "2. WARP+账户（有限流量）" +green "3. WARP Teams (Zero Trust)团队账户（无限流量）" +readp "请选择想要切换的账户类型：" warpup +if [[ $warpup == 1 ]]; then +freewarp +fi + +if [[ $warpup == 2 ]]; then +green "请复制手机WARP客户端WARP+状态下的按键许可证秘钥 或 网络分享的秘钥（26个字符），随意输入有机率获得1G流量WARP+账户" +readp "请输入升级WARP+密钥" ID +readp "设备名称重命名(直接回车随机命名): " dname +if [[ -z $ID ]]; then +red "未输入内容" && WARPup +fi +if [[ -z $dname ]]; then +dname=`date +%s%N |md5sum | cut -c 1-4` +fi +green "设备名称为 $dname" +i=0 +while [ $i -le 4 ]; do let i++ +endpost +yellow "共执行5次，第$i次升级WARP+账户中……" +/usr/local/bin/warp-go --register --config=/usr/local/bin/warp.conf --license=$ID --device-name=$dname +sed -i "s#.*AllowedIPs.*#$allowips#g" /usr/local/bin/warp.conf +echo $endpoint | sh +echo $post | sh +warpip +kill -15 $(pgrep warp-go) >/dev/null 2>&1 && sleep 2 +systemctl restart warp-go +systemctl enable warp-go +systemctl start warp-go +checkwgcf +if [[ $wgcfv4 = plus || $wgcfv6 = plus ]]; then +rm -rf /usr/local/bin/warp.conf.bak /usr/local/bin/warpplus.log +echo "$dname" >> /usr/local/bin/warpplus.log && echo "$ID" >> /usr/local/bin/warpplus.log +green "WARP+ 账户升级成功！" && ShowWGCF && WGCFmenu && break +else +red "WARP+账户升级失败！" && sleep 1 +fi +done +if [[ ! $wgcfv4 = plus && ! $wgcfv6 = plus ]]; then +green "建议如下：" +yellow "1. 检查1.1.1.1 APP中的WARP+账户或网络分享的秘钥是否有流量" +yellow "2. 检查当前WARP许可证密钥绑定的设备超过5台，请进入手机端进行设备移除再尝试升级WARP+账户" && sleep 2 +echo +freewarp +fi +fi + +if [[ $warpup == 3 ]]; then +green "Zero Trust团队Token获取地址：https://web--public--warp-team-api--coia-mfs4.code.run/" +readp "请输入团队账户Token: " token +i=0 +while [ $i -le 4 ]; do let i++ +yellow "共执行5次，第$i次升级WARP Teams账户中……" +/usr/local/bin/warp-go --register --config=/usr/local/bin/warp.conf.bak --team-config "$token" +sed -i "2s#.*#$(sed -ne 2p /usr/local/bin/warp.conf.bak)#;3s#.*#$(sed -ne 3p /usr/local/bin/warp.conf.bak)#" /usr/local/bin/warp.conf >/dev/null 2>&1 +sed -i "4s#.*#$(sed -ne 4p /usr/local/bin/warp.conf.bak)#;5s#.*#$(sed -ne 5p /usr/local/bin/warp.conf.bak)#" /usr/local/bin/warp.conf >/dev/null 2>&1 +warpip +kill -15 $(pgrep warp-go) >/dev/null 2>&1 && sleep 2 +systemctl restart warp-go +systemctl enable warp-go +systemctl start warp-go +checkwgcf +if [[ $wgcfv4 = plus || $wgcfv6 = plus ]]; then +rm -rf /usr/local/bin/warp.conf.bak /usr/local/bin/warpplus.log +green "WARP Teams账户升级成功！" && ShowWGCF && WGCFmenu && break +else +red "WARP Teams账户升级失败！" && sleep 1 +fi +done +if [[ ! $wgcfv4 = plus && ! $wgcfv6 = plus ]]; then +freewarp +fi +fi +} + +WARPonoff(){ +[[ ! $(type -P warp-go) ]] && red "WARP未安装，建议重新安装" && bash CFwarp.sh +readp "1. 关闭WARP功能\n2. 开启/重启WARP功能\n0. 返回上一层\n 请选择：" unwp +if [ $unwp == "1" ]; then +kill -15 $(pgrep warp-go) >/dev/null 2>&1 && sleep 2 +systemctl disable warp-go +checkwgcf +[[ ! $wgcfv4 =~ on|plus && ! $wgcfv6 =~ on|plus ]] && green "关闭WARP成功" || red "关闭WARP失败" +ShowWGCF && WGCFmenu +elif [ $unwp == "2" ]; then +kill -15 $(pgrep warp-go) >/dev/null 2>&1 && sleep 2 +systemctl restart warp-go +systemctl enable warp-go +systemctl start warp-go +checkwgcf +[[ $wgcfv4 =~ on|plus || $wgcfv6 =~ on|plus ]] && green "开启WARP成功" || red "开启WARP失败" +ShowWGCF && WGCFmenu +else +bash CFwarp.sh +fi +} + +cwg(){ +screen -ls | awk '/\.up/ {print $1}' | cut -d "." -f 1 | xargs kill 2>/dev/null +systemctl disable warp-go >/dev/null 2>&1 +kill -15 $(pgrep warp-go) >/dev/null 2>&1 +chattr -i /etc/resolv.conf >/dev/null 2>&1 +sed -i '/^precedence ::ffff:0:0\/96 100/d;/^label 2002::\/16 2/d' /etc/gai.conf 2>/dev/null +rm -rf /usr/local/bin/warp-go /usr/local/bin/warpplus.log /usr/local/bin/warp.conf /usr/local/bin/wgwarp.conf /usr/local/bin/sbwarp.json /usr/bin/warp-go /lib/systemd/system/warp-go.service /root/WARP-UP.sh +} +WARPun(){ +ab="1.仅卸载warp\n2.仅卸载socks5-warp\n3.彻底卸载warp（1+2）\n 请选择：" +readp "$ab" cd +case "$cd" in +1 ) cwg && green "warp卸载完成" && ShowWGCF && WGCFmenu;; +2 ) cso && green "socks5-warp卸载完成" && ShowSOCKS5 && S5menu;; +3 ) cwg && rm -rf /root/warpip && cso && unreswarp && green "warp与socks5-warp都已卸载完成" && ShowWGCF;ShowSOCKS5;IP_Status_menu;; +esac +} + +UPwpyg(){ +if [[ ! $(type -P warp-go) && ! $(type -P warp-cli) ]] && [[ ! -f '/root/CFwarp.sh' ]]; then +red "未正常安装CFwarp脚本!" && exit +fi +upcfwarp +} + +changewarp(){ +cwg && ONEWGCFWARP +} + +upwarpgo(){ +kill -15 $(pgrep warp-go) >/dev/null 2>&1 && sleep 2 +wget -N --no-check-certificate https://gitlab.com/rwkgyg/CFwarp/-/raw/main/warp-go_1.0.8_linux_${cpu} -O /usr/local/bin/warp-go && chmod +x /usr/local/bin/warp-go +systemctl restart warp-go +systemctl enable warp-go +systemctl start warp-go +loVERSION="$(/usr/local/bin/warp-go -v | sed -n 1p | awk '{print $1}' | awk -F"/" '{print $NF}')" +green " 当前 WARP-GO 已安装内核版本号：${loVERSION} ，已是最新版本" +} + +WGproxy(){ +if [[ ! $(type -P warp-go) ]]; then +wget -N https://gitlab.com/rwkgyg/CFwarp/-/raw/main/warp-go_1.0.8_linux_${cpu} -O /usr/local/bin/warp-go && chmod +x /usr/local/bin/warp-go +until [[ -e /usr/local/bin/warp.conf ]]; do +yellow "正在申请WARP普通账户，请稍等" && sleep 1 +/usr/local/bin/warp-go --register --config=/usr/local/bin/warp.conf +mtuwarp +sed -i "s/MTU.*/MTU = $MTU/g" /usr/local/bin/warp.conf +done +fi +/usr/local/bin/warp-go --config=/usr/local/bin/warp.conf --export-wireguard=/usr/local/bin/wgwarp.conf +sed -i '/Endpoint/d' /usr/local/bin/wgwarp.conf +sed -i "11a Endpoint = $endpoint" /usr/local/bin/wgwarp.conf +/usr/local/bin/warp-go --config=/usr/local/bin/warp.conf --export-singbox=/usr/local/bin/sbwarp.json +green "当前Wireguard-warp配置参数如下" && sleep 1 +white "$(cat /usr/local/bin/wgwarp.conf)\n" +yellow "注意：" +yellow "一、此配置与当前VPS无任何关联，根据各平台本地网络就近原则来判定CF的IP地区\n" +yellow "二、此配置可全部复制用于Wireguard客户端，个别参数可复制用于Xray协议的Wireguard-warp出站配置\n" +yellow "三、此配置中Endpoint的IP端口：$endpoint，为当前VPS平台warp优选测试结果" +yellow " 如应用于其他各平台，建议将 $endpoint 替换为其他平台本地网络测试warp优选后的IP端口\n" +yellow "四、此配置中PrivateKey、Address的V6地址、reserved(可选)，三个参数相互绑定关联" +yellow " 当前VPS平台的reserved参数值：$(grep -o '"reserved":\[[^]]*\]' /usr/local/bin/sbwarp.json)\n" +green "当前Wireguard节点二维码分享链接如下" && sleep 1 +qrencode -t ansiutf8 < /usr/local/bin/wgwarp.conf +echo +#green "当前Sing-box出站配置文件如下" && sleep 1 +#yellow "$(cat /usr/local/bin/sbwarp.json | python3 -mjson.tool)" +} + +start_menu(){ +ShowWGCF;ShowSOCKS5 +clear +green "~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~" +echo -e "${bblue} ░██ ░██ ░██ ██ ██ ░█${plain}█ ░██ ░██ ░██ ░█${red}█ ░██${plain} " +echo -e "${bblue} ░██ ░██ ░██ ░░██${plain} ░██ ░██ ░██ ░██${red} ░██ ░██${plain} " +echo -e "${bblue} ░██ ░██ ░██ ${plain} ░██ ██ ░██ █${red}█ ░██ ██ ${plain} " +echo -e "${bblue} ░██ ░${plain}██ ░██ ██ ░██ ██ ░█${red}█ ██ ░██ ██ ${plain} " +echo -e "${bblue} ░██ ${plain} ░██ ░░██ ░██ ░██ ░${red}██ ░██ ░██ ░██ ${plain} " +echo -e "${bblue} ░█${plain}█ ░██ ██ ██ ░██ ░░${red}██ ░██ ░░██ ░██ ░░██ ${plain} " +echo +white "甬哥Github项目 ：github.com/yonggekkk" +white "甬哥blogger博客 ：ygkkk.blogspot.com" +white "甬哥YouTube频道 ：www.youtube.com/@ygkkk" +green "~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~" +yellow " 任意选择适合自己的warp现实方案（选项1、2、3，可单选，可多选共存）" +yellow " 进入脚本快捷方式：cf" +white " =================================================================" +green " 1. 方案一：安装/切换WARP-GO" +[[ $cpu != amd64* ]] && red " 2. 提示：当前VPS的CPU并非AMD64架构，目前不支持安装Socks5-WARP" || green " 2. 方案二：安装Socks5-WARP" +green " 3. 方案三：显示Xray-WireGuard-WARP代理配置文件、二维码" +green " 4. 卸载WARP" +white " -----------------------------------------------------------------" +green " 5. 关闭、开启/重启WARP" +green " 6. WARP其他选项：查看WARP进程守护，刷WARP+流量……" +green " 7. WARP三类账户升级/切换(WARP/WARP+/WARP Teams)" +green " 8. 更新CFwarp安装脚本" +green " 9. 更新WARP-GO内核" +green " 10. 卸载WARP-GO切换为WGCF-WARP内核" +green " 0. 退出脚本 " +red "~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~" +if [ "${wpygV}" = "${remoteV}" ]; then +echo -e " 当前 CFwarp 脚本版本号：${bblue}${wpygV}${plain} 重置版第四版 ，已是最新版本\n" +else +echo -e " 当前 CFwarp 脚本版本号：${bblue}${wpygV}${plain}" +echo -e " 检测到最新 CFwarp 脚本版本号：${yellow}${remoteV}${plain}" +echo -e " ${yellow}$(wget -qO- https://gitlab.com/rwkgyg/CFwarp/raw/main/version/warpV)${plain}" +echo -e " 可选择8进行更新\n" +fi +if [[ $(type -P warp-go) ]] && [[ -f '/root/CFwarp.sh' ]]; then +loVERSION="$(/usr/local/bin/warp-go -v | sed -n 1p | awk '{print $1}' | awk -F"/" '{print $NF}')" +wgVERSION="$(wget -qO- https://gitlab.com/rwkgyg/CFwarp/raw/main/version/warpgoV)" +if [ "${loVERSION}" = "${wgVERSION}" ]; then +echo -e " 当前 WARP-GO 已安装内核版本号：${bblue}${loVERSION}${plain} ，已是最新版本" +else +echo -e " 当前 WARP-GO 已安装内核版本号：${bblue}${loVERSION}${plain}" +echo -e " 检测到最新 WARP-GO 内核版本号：${yellow}${wgVERSION}${plain} ，可选择9进行更新" +fi +fi +red "~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~" +white " VPS系统信息如下：" +white " VPS操作系统: $(blue "$op") \c" && white " 内核版本: $(blue "$version") \c" && white " CPU架构 : $(blue "$cpu") \c" && white " 虚拟化类型: $(blue "$vi")" +IP_Status_menu +echo +readp " 请输入数字:" Input +case "$Input" in + 1 ) warpinscha;; + 2 ) [[ $cpu = amd64* ]] && SOCKS5ins || bash CFwarp.sh;; + 3 ) WGproxy;; + 4 ) WARPun && uncf ;; + 5 ) WARPonoff;; + 6 ) WARPtools;; + 7 ) WARPup;; + 8 ) UPwpyg;; + 9 ) upwarpgo;; + 10 ) changewarp;; + * ) exit +esac +} +if [ $# == 0 ]; then +bit=`uname -m` +[[ $bit = aarch64 ]] && cpu=arm64 +if [[ $bit = x86_64 ]]; then +amdv=$(cat /proc/cpuinfo | grep flags | head -n 1 | cut -d: -f2) +case "$amdv" in +*avx512*) cpu=amd64v4;; +*avx2*) cpu=amd64v3;; +*sse3*) cpu=amd64v2;; +*) cpu=amd64;; +esac +fi +start_menu +fi +} + +ONEWGCFWARP(){ +yellow "\n 请稍等……" && sleep 2 +ud4='sed -i "7 s/^/PostUp = ip -4 rule add from $(ip route get 162.159.192.1 | grep -oP '"'src \K\S+') lookup main\n/"'" /etc/wireguard/wgcf.conf && sed -i "7 s/^/PostDown = ip -4 rule delete from $(ip route get 162.159.192.1 | grep -oP '"'src \K\S+') lookup main\n/"'" /etc/wireguard/wgcf.conf' +ud6='sed -i "7 s/^/PostUp = ip -6 rule add from $(ip route get 2606:4700:d0::a29f:c001 | grep -oP '"'src \K\S+') lookup main\n/"'" /etc/wireguard/wgcf.conf && sed -i "7 s/^/PostDown = ip -6 rule delete from $(ip route get 2606:4700:d0::a29f:c001 | grep -oP '"'src \K\S+') lookup main\n/"'" /etc/wireguard/wgcf.conf' +ud4ud6='sed -i "7 s/^/PostUp = ip -4 rule add from $(ip route get 162.159.192.1 | grep -oP '"'src \K\S+') lookup main\n/"'" /etc/wireguard/wgcf.conf && sed -i "7 s/^/PostDown = ip -4 rule delete from $(ip route get 162.159.192.1 | grep -oP '"'src \K\S+') lookup main\n/"'" /etc/wireguard/wgcf.conf && sed -i "7 s/^/PostUp = ip -6 rule add from $(ip route get 2606:4700:d0::a29f:c001 | grep -oP '"'src \K\S+') lookup main\n/"'" /etc/wireguard/wgcf.conf && sed -i "7 s/^/PostDown = ip -6 rule delete from $(ip route get 2606:4700:d0::a29f:c001 | grep -oP '"'src \K\S+') lookup main\n/"'" /etc/wireguard/wgcf.conf' +c1="sed -i '/0\.0\.0\.0\/0/d' /etc/wireguard/wgcf.conf" +c2="sed -i '/\:\:\/0/d' /etc/wireguard/wgcf.conf" +c3="sed -i "s/engage.cloudflareclient.com:2408/$endpoint/g" /etc/wireguard/wgcf.conf" +c4="sed -i "s/engage.cloudflareclient.com:2408/$endpoint/g" /etc/wireguard/wgcf.conf" +c5="sed -i 's/1.1.1.1/8.8.8.8,2001:4860:4860::8888/g' /etc/wireguard/wgcf.conf" +c6="sed -i 's/1.1.1.1/2001:4860:4860::8888,8.8.8.8/g' /etc/wireguard/wgcf.conf" + +ShowWGCF(){ +UA_Browser="Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/80.0.3987.87 Safari/537.36" +v4v6 +warppflow=$((`grep -oP '"quota":\K\d+' <<< $(curl -sm4 "https://api.cloudflareclient.com/v0a884/reg/$(grep 'device_id' /etc/wireguard/wgcf-account.toml 2>/dev/null | cut -d \' -f2)" -H "User-Agent: okhttp/3.12.1" -H "Authorization: Bearer $(grep 'access_token' /etc/wireguard/wgcf-account.toml 2>/dev/null | cut -d \' -f2)")`)) +flow=`echo "scale=2; $warppflow/1000000000" | bc` +[[ -e /etc/wireguard/wgcf+p.log ]] && cfplus="WARP+普通账户(有限WARP+流量：$flow GB)，设备名称：$(grep -s 'Device name' /etc/wireguard/wgcf+p.log | awk '{ print $NF }')" || cfplus="WARP+Teams账户(无限WARP+流量)" +if [[ -n $v4 ]]; then +nf4 +[[ $(curl -s4S https://chat.openai.com/ -I | grep "text/plain") != "" ]] && chat='遗憾，当前IP无法访问ChatGPT官网服务' || chat='恭喜，当前IP支持访问ChatGPT官网服务' +wgcfv4=$(curl -s4 https://www.cloudflare.com/cdn-cgi/trace -k | grep warp | cut -d= -f2) +isp4a=`curl -sm6 --user-agent "${UA_Browser}" http://ip-api.com/json/$v4?lang=zh-CN -k | cut -f13 -d ":" | cut -f2 -d '"'` +isp4b=`curl -sm6 --user-agent "${UA_Browser}" https://api.ip.sb/geoip/$v4 -k | awk -F "isp" '{print $2}' | awk -F "offset" '{print $1}' | sed "s/[,\":]//g"` +[[ -n $isp4a ]] && isp4=$isp4a || isp4=$isp4b +nonf=$(curl -sm6 --user-agent "${UA_Browser}" http://ip-api.com/json/$v4?lang=zh-CN -k | cut -f2 -d"," | cut -f4 -d '"') +#sunf=$(./nf | awk '{print $1}' | sed -n '4p') +#snnf=$(curl -s4m6 ip.p3terx.com -k | sed -n 2p | awk '{print $3}') +country=$nonf +case ${wgcfv4} in +plus) +WARPIPv4Status=$(white "WARP+状态：\c" ; rred "运行中，$cfplus" ; white " 服务商 Cloudflare 获取IPV4地址：\c" ; rred "$v4 $country" ; white " 奈飞NF解锁情况：\c" ; rred "$NF" ; white " ChatGPT解锁情况：\c" ; rred "$chat");; +on) +WARPIPv4Status=$(white "WARP状态：\c" ; green "运行中，WARP普通账户(无限WARP流量)" ; white " 服务商 Cloudflare 获取IPV4地址：\c" ; green "$v4 $country" ; white " 奈飞NF解锁情况：\c" ; green "$NF" ; white " ChatGPT解锁情况：\c" ; green "$chat");; +off) +WARPIPv4Status=$(white "WARP状态：\c" ; yellow "关闭中" ; white " 服务商 $isp4 获取IPV4地址：\c" ; yellow "$v4 $country" ; white " 奈飞NF解锁情况：\c" ; yellow "$NF" ; white " ChatGPT解锁情况：\c" ; yellow "$chat");; +esac +else +WARPIPv4Status=$(white "IPV4状态：\c" ; red "不存在IPV4地址 ") +fi +if [[ -n $v6 ]]; then +nf6 +[[ $(curl -s6S https://chat.openai.com/ -I | grep "text/plain") != "" ]] && chat='遗憾，当前IP无法访问ChatGPT官网服务' || chat='恭喜，当前IP支持访问ChatGPT官网服务' +wgcfv6=$(curl -s6 https://www.cloudflare.com/cdn-cgi/trace -k | grep warp | cut -d= -f2) +isp6a=`curl -sm6 --user-agent "${UA_Browser}" http://ip-api.com/json/$v6?lang=zh-CN -k | cut -f13 -d":" | cut -f2 -d '"'` +isp6b=`curl -sm6 --user-agent "${UA_Browser}" https://api.ip.sb/geoip/$v6 -k | awk -F "isp" '{print $2}' | awk -F "offset" '{print $1}' | sed "s/[,\":]//g"` +[[ -n $isp6a ]] && isp6=$isp6a || isp6=$isp6b +nonf=$(curl -sm6 --user-agent "${UA_Browser}" http://ip-api.com/json/$v6?lang=zh-CN -k | cut -f2 -d"," | cut -f4 -d '"') +#sunf=$(./nf | awk '{print $1}' | sed -n '8p') +#snnf=$(curl -s6m6 ip.p3terx.com -k | sed -n 2p | awk '{print $3}') +country=$nonf +case ${wgcfv6} in +plus) +WARPIPv6Status=$(white "WARP+状态：\c" ; rred "运行中，$cfplus" ; white " 服务商 Cloudflare 获取IPV6地址：\c" ; rred "$v6 $country" ; white " 奈飞NF解锁情况：\c" ; rred "$NF" ; white " ChatGPT解锁情况：\c" ; rred "$chat");; +on) +WARPIPv6Status=$(white "WARP状态：\c" ; green "运行中，WARP普通账户(无限WARP流量)" ; white " 服务商 Cloudflare 获取IPV6地址：\c" ; green "$v6 $country" ; white " 奈飞NF解锁情况：\c" ; green "$NF" ; white " ChatGPT解锁情况：\c" ; green "$chat");; +off) +WARPIPv6Status=$(white "WARP状态：\c" ; yellow "关闭中" ; white " 服务商 $isp6 获取IPV6地址：\c" ; yellow "$v6 $country" ; white " 奈飞NF解锁情况：\c" ; yellow "$NF" ; white " ChatGPT解锁情况：\c" ; yellow "$chat");; +esac +else +WARPIPv6Status=$(white "IPV6状态：\c" ; red "不存在IPV6地址 ") +fi +} + +STOPwgcf(){ +if [[ $(type -P warp-cli) ]]; then +red "已安装Socks5-WARP，不支持当前选择的wgcf-warp安装方案" +systemctl restart wg-quick@wgcf ; bash CFwarp.sh fi } @@ -205,23 +1348,19 @@ ShowWGCF && WGCFmenu } WGproxy(){ -[[ ! $(type -P wg-quick) ]] && red "未安装Wgcf-WARP" && bash CFwarp.sh -blue "\nWireguard客户端相关设置说明请关注甬哥博客" -green "\n根据网络环境，选择Wireguard代理节点的Endpoint端点" -readp "1. 使用IPV4端点 (支持v4或v6+v4网络环境，回车默认)\n2. 使用IPV6端点 (仅支持v6+v4网络环境)\n请选择：" IPet -if [ -z "${IPet}" ] || [ $IPet == "1" ];then -endip=162.159.193.10 -elif [ $IPet == "2" ];then -endip=[2606:4700:100::a29f:c101] -else -red "输入错误，请重新选择" && WGproxy -fi +[[ ! $(type -P wg-quick) ]] && red "未安装Wgcf-WARP，安装好wgcf-warp才能执行" && sleep 3 && bash CFwarp.sh cp -f /etc/wireguard/wgcf.conf /etc/wireguard/wgproxy.conf >/dev/null 2>&1 sed -i '/PostUp/d;/PostDown/d;/AllowedIPs/d;/Endpoint/d' /etc/wireguard/wgproxy.conf sed -i "8a AllowedIPs = 0.0.0.0\/0\nAllowedIPs = ::\/0\n" /etc/wireguard/wgproxy.conf -sed -i "10a Endpoint = $endip:2408" /etc/wireguard/wgproxy.conf -green "当前wireguard客户端配置文件wgproxy.conf内容如下，保存到 /etc/wireguard/wgproxy.conf\n" && sleep 2 -yellow "$(cat /etc/wireguard/wgproxy.conf)\n" +sed -i "10a Endpoint = $endpoint" /etc/wireguard/wgproxy.conf +green "当前wireguard-warp配置文件wgproxy.conf内容如下，保存到 /etc/wireguard/wgproxy.conf\n" && sleep 2 +white "$(cat /etc/wireguard/wgproxy.conf)\n" +yellow "注意：" +yellow "一、此配置与当前VPS无任何关联，根据各平台本地网络就近原则来判定CF的IP地区\n" +yellow "二、此配置可全部复制用于Wireguard客户端\n" +yellow "三、此配置中Endpoint的IP端口：$endpoint，为当前VPS平台warp优选测试结果" +yellow " 如应用于其他各平台，建议将 $endpoint 替换为其他平台本地网络测试warp优选后的IP端口\n" +yellow "四、此配置中PrivateKey与Address的V6地址，这两个参数相互绑定关联\n" green "当前wireguard节点二维码分享链接如下" && sleep 2 qrencode -t ansiutf8 < /etc/wireguard/wgproxy.conf } @@ -240,7 +1379,7 @@ cp -f /etc/wireguard/wgcf-profile.conf /etc/wireguard/wgcf.conf >/dev/null 2>&1 } nat4(){ -[[ -n $(ip route get 162.159.192.1 | grep -oP 'src \K\S+') ]] && ABC4=$ud4 || ABC4=echo +[[ -n $(ip route get 162.159.192.1 2>/dev/null | grep -oP 'src \K\S+') ]] && ABC4=$ud4 || ABC4=echo } WGCFv4(){ @@ -250,7 +1389,7 @@ if [[ ! $wgcfv4 =~ on|plus && ! $wgcfv6 =~ on|plus ]]; then v4v6 if [[ -n $v4 && -n $v6 ]]; then green "当前原生v4+v6双栈vps首次安装wgcf-warp\n现添加IPV4单栈wgcf-warp模式" && sleep 2 -ABC1=$c5 && ABC2=$c2 && ABC3=$ud4 && WGCFins +ABC1=$c5 && ABC2=$c2 && ABC3=$ud4 && ABC4=$c3 && WGCFins fi if [[ -n $v6 && -z $v4 ]]; then green "当前原生v6单栈vps首次安装wgcf-warp\n现添加IPV4单栈wgcf-warp模式" && sleep 2 @@ -258,15 +1397,16 @@ ABC1=$c5 && ABC2=$c4 && ABC3=$c2 && nat4 && WGCFins fi if [[ -z $v6 && -n $v4 ]]; then green "当前原生v4单栈vps首次安装wgcf-warp\n现添加IPV4单栈wgcf-warp模式" && sleep 2 -STOPwgcf ; ABC1=$c5 && ABC2=$c2 && ABC3=$c3 && ABC4=$ud4 && WGCFins +ABC1=$c5 && ABC2=$c2 && ABC3=$c3 && ABC4=$ud4 && WGCFins fi +echo 'w4' > /root/warpip/wp.log first4 else wg-quick down wgcf >/dev/null 2>&1 sleep 1 && v4v6 if [[ -n $v4 && -n $v6 ]]; then green "当前原生v4+v6双栈vps已安装wgcf-warp\n现快速切换IPV4单栈wgcf-warp模式" && sleep 2 -conf && ABC1=$c5 && ABC2=$c2 && ABC3=$ud4 && ABC +conf && ABC1=$c5 && ABC2=$c2 && ABC3=$ud4 && ABC4=$c3 && ABC fi if [[ -n $v6 && -z $v4 ]]; then green "当前原生v6单栈vps已安装wgcf-warp\n现快速切换IPV4单栈wgcf-warp模式" && sleep 2 @@ -274,8 +1414,9 @@ conf && ABC1=$c5 && ABC2=$c4 && ABC3=$c2 && nat4 && ABC fi if [[ -z $v6 && -n $v4 ]]; then green "当前原生v4单栈vps已安装wgcf-warp\n现快速切换IPV4单栈wgcf-warp模式" && sleep 2 -STOPwgcf ; conf && ABC1=$c5 && ABC2=$c2 && ABC3=$c3 && ABC4=$ud4 && ABC +conf && ABC1=$c5 && ABC2=$c2 && ABC3=$c3 && ABC4=$ud4 && ABC fi +echo 'w4' > /root/warpip/wp.log CheckWARP && first4 && ShowWGCF && WGCFmenu fi } @@ -287,7 +1428,7 @@ if [[ ! $wgcfv4 =~ on|plus && ! $wgcfv6 =~ on|plus ]]; then v4v6 if [[ -n $v4 && -n $v6 ]]; then green "当前原生v4+v6双栈vps首次安装wgcf-warp\n现添加IPV6单栈wgcf-warp模式" && sleep 2 -ABC1=$c5 && ABC2=$c1 && ABC3=$ud6 && WGCFins +ABC1=$c5 && ABC2=$c1 && ABC3=$ud6 && ABC4=$c3 && WGCFins fi if [[ -n $v6 && -z $v4 ]]; then green "当前原生v6单栈vps首次安装wgcf-warp\n现添加IPV6单栈wgcf-warp模式(无IPV4！！！)" && sleep 2 @@ -297,12 +1438,13 @@ if [[ -z $v6 && -n $v4 ]]; then green "当前原生v4单栈vps首次安装wgcf-warp\n现添加IPV6单栈wgcf-warp模式" && sleep 2 ABC1=$c5 && ABC2=$c3 && ABC3=$c1 && WGCFins fi +echo 'w6' > /root/warpip/wp.log else wg-quick down wgcf >/dev/null 2>&1 sleep 1 && v4v6 if [[ -n $v4 && -n $v6 ]]; then green "当前原生v4+v6双栈vps已安装wgcf-warp\n现快速切换IPV6单栈wgcf-warp模式" && sleep 2 -conf && ABC1=$c5 && ABC2=$c1 && ABC3=$ud6 && ABC +conf && ABC1=$c5 && ABC2=$c1 && ABC3=$ud6 && ABC4=$c3 && ABC fi if [[ -n $v6 && -z $v4 ]]; then green "当前原生v6单栈vps已安装wgcf-warp\n现快速切换IPV6单栈wgcf-warp模式(无IPV4！！！)" && sleep 2 @@ -312,7 +1454,8 @@ if [[ -z $v6 && -n $v4 ]]; then green "当前原生v4单栈vps已安装wgcf-warp\n现快速切换IPV6单栈wgcf-warp模式" && sleep 2 conf && ABC1=$c5 && ABC2=$c3 && ABC3=$c1 && ABC fi -CheckWARP && ShowWGCF && WGCFmenu +echo 'w6' > /root/warpip/wp.log +CheckWARP && first4 && ShowWGCF && WGCFmenu fi } @@ -323,133 +1466,64 @@ if [[ ! $wgcfv4 =~ on|plus && ! $wgcfv6 =~ on|plus ]]; then v4v6 if [[ -n $v4 && -n $v6 ]]; then green "当前原生v4+v6双栈vps首次安装wgcf-warp\n现添加IPV4+IPV6双栈wgcf-warp模式" && sleep 2 -STOPwgcf ; ABC1=$c5 && ABC2=$ud4ud6 && WGCFins +ABC1=$c5 && ABC2=$ud4ud6 && ABC3=$c3 && WGCFins fi if [[ -n $v6 && -z $v4 ]]; then green "当前原生v6单栈vps首次安装wgcf-warp\n现添加IPV4+IPV6双栈wgcf-warp模式" && sleep 2 -STOPwgcf ; ABC1=$c5 && ABC2=$c4 && ABC3=$ud6 && nat4 && WGCFins +ABC1=$c5 && ABC2=$c4 && ABC3=$ud6 && nat4 && WGCFins fi if [[ -z $v6 && -n $v4 ]]; then green "当前原生v4单栈vps首次安装wgcf-warp\n现添加IPV4+IPV6双栈wgcf-warp模式" && sleep 2 -STOPwgcf ; ABC1=$c5 && ABC2=$c3 && ABC3=$ud4 && WGCFins +ABC1=$c5 && ABC2=$c3 && ABC3=$ud4 && WGCFins fi +echo 'w64' > /root/warpip/wp.log else wg-quick down wgcf >/dev/null 2>&1 sleep 1 && v4v6 if [[ -n $v4 && -n $v6 ]]; then green "当前原生v4+v6双栈vps已安装wgcf-warp\n现快速切换IPV4+IPV6双栈wgcf-warp模式" && sleep 2 -STOPwgcf ; conf && ABC1=$c5 && ABC2=$ud4ud6 && ABC +conf && ABC1=$c5 && ABC2=$ud4ud6 && ABC3=$c3 && ABC fi if [[ -n $v6 && -z $v4 ]]; then green "当前原生v6单栈vps已安装wgcf-warp\n现快速切换IPV4+IPV6双栈wgcf-warp模式" && sleep 2 -STOPwgcf ; conf && ABC1=$c5 && ABC2=$c4 && ABC3=$ud6 && nat4 && ABC +conf && ABC1=$c5 && ABC2=$c4 && ABC3=$ud6 && nat4 && ABC fi if [[ -z $v6 && -n $v4 ]]; then green "当前原生v4单栈vps已安装wgcf-warp\n现快速切换IPV4+IPV6双栈wgcf-warp模式" && sleep 2 -STOPwgcf ; conf && ABC1=$c5 && ABC2=$c3 && ABC3=$ud4 && ABC +conf && ABC1=$c5 && ABC2=$c3 && ABC3=$ud4 && ABC fi -CheckWARP && ShowWGCF && WGCFmenu +echo 'w64' > /root/warpip/wp.log +CheckWARP && first4 && ShowWGCF && WGCFmenu fi } -WGCFmenu(){ -white "------------------------------------------------------------------------------------" -white " 当前 IPV4 接管出站流量情况如下 " -white " ${WARPIPv4Status}" -white "------------------------------------------------------------------------------------" -white " 当前 IPV6 接管出站流量情况如下" -white " ${WARPIPv6Status}" -white "------------------------------------------------------------------------------------" -} -back(){ -white "------------------------------------------------------------------------------------" -white " 回主菜单，请按任意键" -white " 退出脚本，请按Ctrl+C" -get_char && bash CFwarp.sh -} - -IP_Status_menu(){ -WGCFmenu -} - CheckWARP(){ i=0 wg-quick down wgcf >/dev/null 2>&1 -while [ $i -le 4 ]; do let i++ -yellow "共执行5次，第$i次获取warp的IP中……" +while [ $i -le 9 ]; do let i++ +yellow "共执行10次，第$i次获取warp的IP中……" systemctl restart wg-quick@wgcf >/dev/null 2>&1 checkwgcf [[ $wgcfv4 =~ on|plus || $wgcfv6 =~ on|plus ]] && green "恭喜！warp的IP获取成功！" && break || red "遗憾！warp的IP获取失败" done checkwgcf if [[ ! $wgcfv4 =~ on|plus && ! $wgcfv6 =~ on|plus ]]; then -green "安装WARP失败，建议如下：" +red "安装WARP失败，还原VPS，卸载Wgcf-WARP组件中……" +cwg && rm -rf /root/warpip +echo [[ $release = Centos && ${vsid} -lt 7 ]] && yellow "当前系统版本号：Centos $vsid \n建议使用 Centos 7 以上系统 " [[ $release = Ubuntu && ${vsid} -lt 18 ]] && yellow "当前系统版本号：Ubuntu $vsid \n建议使用 Ubuntu 18 以上系统 " [[ $release = Debian && ${vsid} -lt 10 ]] && yellow "当前系统版本号：Debian $vsid \n建议使用 Debian 10 以上系统 " -yellow "1、强烈建议使用官方源升级系统及内核加速！如已使用第三方源及内核加速，请务必更新到最新版，或重置为官方源" -yellow "2、部分VPS系统极度精简，相关依赖需自行安装后再尝试" -yellow "3、查看https://www.cloudflarestatus.com/,你当前VPS就近区域可能处于黄色的【Re-routed】状态" +red "你或许可以使用方案二或方案三来实现WARP" +red "也可以选择WARP-GO核心来安装WARP方案一" exit else green "ok" fi -xyz(){ -att -[[ -e /root/check.sh ]] && screen -S aw -X quit ; screen -UdmS aw bash -c '/bin/bash /root/check.sh' -[[ -e /root/WARP-CR.sh ]] && screen -S cr -X quit ; screen -UdmS cr bash -c '/bin/bash /root/WARP-CR.sh' -[[ -e /root/WARP-CP.sh ]] && screen -S cp -X quit ; screen -UdmS cp bash -c '/bin/bash /root/WARP-CP.sh' -if [[ -e /root/WARP-UP.sh ]]; then -screen -S up -X quit ; screen -UdmS up bash -c '/bin/bash /root/WARP-UP.sh' -else -green "安装warp在线监测守护进程" -cat>/root/WARP-UP.sh<<-\EOF -#!/bin/bash -red(){ echo -e "\033[31m\033[01m$1\033[0m";} -green(){ echo -e "\033[32m\033[01m$1\033[0m";} -checkwgcf(){ -wgcfv6=$(curl -s6m6 https://www.cloudflare.com/cdn-cgi/trace -k | grep warp | cut -d= -f2) -wgcfv4=$(curl -s4m6 https://www.cloudflare.com/cdn-cgi/trace -k | grep warp | cut -d= -f2) -} -warpclose(){ -wg-quick down wgcf >/dev/null 2>&1 ; systemctl stop wg-quick@wgcf >/dev/null 2>&1 ; systemctl disable wg-quick@wgcf >/dev/null 2>&1 -} -warpopen(){ -wg-quick down wgcf >/dev/null 2>&1 ; systemctl enable wg-quick@wgcf >/dev/null 2>&1 ; systemctl start wg-quick@wgcf >/dev/null 2>&1 ; systemctl restart wg-quick@wgcf >/dev/null 2>&1 -} -warpre(){ -i=0 -while [ $i -le 4 ]; do let i++ -warpopen -checkwgcf -[[ $wgcfv4 =~ on|plus || $wgcfv6 =~ on|plus ]] && green "中断后的warp尝试获取IP成功！" && break || red "中断后的warp尝试获取IP失败！" -done -checkwgcf -if [[ ! $wgcfv4 =~ on|plus && ! $wgcfv6 =~ on|plus ]]; then -warpclose -red "由于5次尝试获取warp的IP失败，现执行停止并关闭warp，VPS恢复原IP状态" -fi -} -while true; do -green "检测warp是否启动中…………" -checkwgcf -[[ $wgcfv4 =~ on|plus || $wgcfv6 =~ on|plus ]] && green "恭喜！warp状态为运行中！下轮检测将在你设置的60秒后自动执行" && sleep 60s || (warpre ; green "下轮检测将在你设置的50秒后自动执行" ; sleep 50s) -done -EOF -readp "warp状态为运行时，重新检测warp状态间隔时间（回车默认60秒）,请输入间隔时间（例：50秒，输入50）:" stop -[[ -n $stop ]] && sed -i "s/60s/${stop}s/g;s/60秒/${stop}秒/g" /root/WARP-UP.sh || green "默认间隔60秒" -readp "warp状态为中断时(连续5次失败自动关闭warp)，继续检测WARP状态间隔时间（回车默认50秒）,请输入间隔时间（例：50秒，输入50）:" goon -[[ -n $goon ]] && sed -i "s/50s/${goon}s/g;s/50秒/${goon}秒/g" /root/WARP-UP.sh || green "默认间隔50秒" -[[ -e /root/WARP-UP.sh ]] && screen -S up -X quit ; screen -UdmS up bash -c '/bin/bash /root/WARP-UP.sh' -green "设置screen窗口名称'up'" && sleep 2 -grep -qE "^ *@reboot root screen -UdmS up bash -c '/bin/bash /root/WARP-UP.sh' >/dev/null 2>&1" /etc/crontab || echo "@reboot root screen -UdmS up bash -c '/bin/bash /root/WARP-UP.sh' >/dev/null 2>&1" >> /etc/crontab -green "添加warp在线守护进程功能" -fi -} } WGCFins(){ -rm -rf /usr/local/bin/wgcf /etc/wireguard/wgcf.conf /etc/wireguard/wgcf-profile.conf /etc/wireguard/wgcf-account.toml /etc/wireguard/wgcf+p.log /etc/wireguard/ID /usr/bin/wireguard-go wgcf-account.toml wgcf-profile.conf +rm -rf /usr/local/bin/wgcf /etc/wireguard/wgcf.conf /etc/wireguard/wgcf-profile.conf /etc/wireguard/wgcf-account.toml /etc/wireguard/wgcf+p.log /etc/wireguard/ID /usr/bin/wireguard-go /usr/bin/wgcf wgcf-account.toml wgcf-profile.conf ShowWGCF if [[ $release = Centos ]]; then if [[ ${vsid} =~ 8 ]]; then @@ -478,59 +1552,30 @@ yellow "申请warp普通账户过程中可能会多次提示：429 Too Many Requ echo | wgcf register --accept-tos done wgcf generate -yellow "开始自动设置warp的MTU最佳网络吞吐量值，以优化WARP网络！" -MTUy=1500 -MTUc=10 -if [[ -n $v6 && -z $v4 ]]; then -ping='ping6' -IP1='2606:4700:4700::1111' -IP2='2001:4860:4860::8888' -else -ping='ping' -IP1='1.1.1.1' -IP2='8.8.8.8' -fi -while true; do -if ${ping} -c1 -W1 -s$((${MTUy} - 28)) -Mdo ${IP1} >/dev/null 2>&1 || ${ping} -c1 -W1 -s$((${MTUy} - 28)) -Mdo ${IP2} >/dev/null 2>&1; then -MTUc=1 -MTUy=$((${MTUy} + ${MTUc})) -else -MTUy=$((${MTUy} - ${MTUc})) -[[ ${MTUc} = 1 ]] && break -fi -[[ ${MTUy} -le 1360 ]] && MTUy='1360' && break -done -MTU=$((${MTUy} - 80)) -green "MTU最佳网络吞吐量值= $MTU 已设置完毕" +mtuwarp sed -i "s/MTU.*/MTU = $MTU/g" wgcf-profile.conf +warpip cp -f wgcf-profile.conf /etc/wireguard/wgcf.conf >/dev/null 2>&1 cp -f wgcf-account.toml /etc/wireguard/buckup-account.toml >/dev/null 2>&1 ABC mv -f wgcf-profile.conf /etc/wireguard >/dev/null 2>&1 mv -f wgcf-account.toml /etc/wireguard >/dev/null 2>&1 systemctl enable wg-quick@wgcf >/dev/null 2>&1 -CheckWARP && ShowWGCF && WGCFmenu && lncf -} - -warprefresh(){ -wget -N https://gitlab.com/rwkgyg/CFwarp/raw/main/wp-plus.py -sed -i "27 s/[(][^)]*[)]//g" wp-plus.py -readp "客户端配置ID(36个字符)：" ID -sed -i "27 s/input/'$ID'/" wp-plus.py -python3 wp-plus.py +CheckWARP && ShowWGCF && xyz && WGCFmenu && lncf && reswarp } WARPup(){ +[[ ! $(type -P wg-quick) ]] && red "未安装wgcf-warp，安装好wgcf-warp才能执行" && sleep 3 && bash CFwarp.sh backconf(){ -yellow "升级失败，自动恢复warp普通账户" +red "升级失败，自动恢复warp普通账户" sed -i "2s#.*#$(sed -ne 2p /etc/wireguard/wgcf-profile.conf)#;4s#.*#$(sed -ne 4p /etc/wireguard/wgcf-profile.conf)#" /etc/wireguard/wgcf.conf -systemctl restart wg-quick@wgcf -ShowWGCF && WGCFmenu && back +CheckWARP && ShowWGCF && WGCFmenu } ab="1.Teams账户\n2.warp+账户\n3.普通warp账户\n0.返回上一层\n 请选择：" readp "$ab" cd case "$cd" in 1 ) +red "建议使用warp-go的方案可大概率直接获取Teams团队账户，无需提取参数升级" [[ ! -e /etc/wireguard/wgcf.conf ]] && red "无法找到wgcf-warp配置文件，建议重装wgcf-warp" && bash CFwarp.sh readp "请复制privateKey(44个字符）：" Key readp "请复制IPV6的Address：" Add @@ -539,7 +1584,7 @@ sed -i "s#PrivateKey.*#PrivateKey = $Key#g;s#Address.*128#Address = $Add/128#g" systemctl restart wg-quick@wgcf >/dev/null 2>&1 checkwgcf if [[ $wgcfv4 = plus || $wgcfv6 = plus ]]; then -rm -rf /etc/wireguard/wgcf+p.log && green "wgcf-warp+Teams账户已生效" && ShowWGCF && WGCFmenu && back +rm -rf /etc/wireguard/wgcf+p.log && green "wgcf-warp+Teams账户已生效" && ShowWGCF && WGCFmenu else backconf fi @@ -547,7 +1592,6 @@ else backconf fi;; 2 ) -[[ ! $(type -P wg-quick) ]] && red "未安装wgcf-warp，无法升级到wgcf-warp+账户" && bash CFwarp.sh ShowWGCF [[ $wgcfv4 = plus || $wgcfv6 = plus ]] && red "当前已是Wgcf-WARP+账户，无须再升级" && bash CFwarp.sh readp "请确保手机上的warp客户端已处于warp+状态，复制按键许可证秘钥(26个字符):" ID @@ -563,10 +1607,9 @@ flow=`echo "scale=2; $warppflow/1000000000" | bc` green "已升级为wgcf-warp+账户\nwgcf-warp+账户设备名称：$(grep -s 'Device name' /etc/wireguard/wgcf+p.log | awk '{ print $NF }')\nwgcf-warp+账户剩余流量：$flow GB" ShowWGCF && WGCFmenu else -red "升级失败，退出脚本" && CFwarp.sh +red "经IP检测，升级warp+失败，请确保密钥使用的设备不超过5个，建议更换下秘钥再尝试，脚本退出" && exit fi;; 3 ) -[[ ! $(type -P wg-quick) ]] && red "未安装wgcf-warp" && bash CFwarp.sh checkwgcf if [[ $wgcfv4 = plus || $wgcfv6 = plus ]]; then fawgcf @@ -579,65 +1622,42 @@ esac } WARPonoff(){ -ab="1.开启或者完全关闭wgcf-warp\n0.返回上一层\n 请选择：" -readp "$ab" cd -case "$cd" in -1 ) -[[ ! $(type -P wg-quick) ]] && red "wgcf-warp未安装，无法启动或关闭，建议重新安装wgcf-warp" && bash CFwarp.sh -checkwgcf -if [[ $wgcfv4 =~ on|plus || $wgcfv6 =~ on|plus ]]; then -yellow "当前wgcf-warp状态：已运行中，现执行:完全关闭……" +[[ ! $(type -P wg-quick) ]] && red "WARP未安装，建议重新安装" && bash CFwarp.sh +readp "1. 关闭WARP功能\n2. 开启/重启WARP功能\n0. 返回上一层\n 请选择：" unwp +if [ $unwp == "1" ]; then wg-quick down wgcf >/dev/null 2>&1 systemctl stop wg-quick@wgcf >/dev/null 2>&1 systemctl disable wg-quick@wgcf >/dev/null 2>&1 -checkwgcf -[[ ! $wgcfv4 =~ on|plus && ! $wgcfv6 =~ on|plus ]] && green "关闭wgcf-warp成功" || red "关闭wgcf-warp失败" -elif [[ ! $wgcfv4 =~ on|plus && ! $wgcfv6 =~ on|plus ]]; then -yellow "当前wgcf-warp为完全关闭状态，现执行:恢复运行……" +checkwgcf +[[ ! $wgcfv4 =~ on|plus && ! $wgcfv6 =~ on|plus ]] && green "关闭warp成功" || red "关闭warp失败" +elif [ $unwp == "2" ]; then wg-quick down wgcf >/dev/null 2>&1 systemctl restart wg-quick@wgcf >/dev/null 2>&1 -CheckWARP +checkwgcf +[[ $wgcfv4 =~ on|plus || $wgcfv6 =~ on|plus ]] && green "开启warp成功" || red "开启warp失败" +else +bash CFwarp.sh fi -ShowWGCF && WGCFmenu && back;; -0 ) WARPOC -esac } cwg(){ -screen -S up -X quit ; rm -rf WARP-UP.sh ; sed -i '/WARP-UP.sh/d' /etc/crontab +screen -ls | awk '/\.up/ {print $1}' | cut -d "." -f 1 | xargs kill 2>/dev/null wg-quick down wgcf >/dev/null 2>&1 systemctl disable wg-quick@wgcf >/dev/null 2>&1 -$yumapt autoremove wireguard-tools +$yumapt remove wireguard-tools +$yumapt autoremove dig9 -sed -i '/^precedence ::ffff:0:0\/96 100/d;/^label 2002::\/16 2/d' /etc/gai.conf +sed -i '/^precedence ::ffff:0:0\/96 100/d;/^label 2002::\/16 2/d' /etc/gai.conf 2>/dev/null +rm -rf /usr/local/bin/wgcf /usr/bin/wg-quick /etc/wireguard/wgcf.conf /etc/wireguard/wgcf-profile.conf /etc/wireguard/buckup-account.toml /etc/wireguard/wgcf-account.toml /etc/wireguard/wgcf+p.log /etc/wireguard/ID /usr/bin/wireguard-go /usr/bin/wgcf wgcf-account.toml wgcf-profile.conf /root/WARP-UP.sh } WARPun(){ -wj="rm -rf /usr/local/bin/wgcf /etc/wireguard/wgcf.conf /etc/wireguard/wgcf-profile.conf /etc/wireguard/wgcf-account.toml /etc/wireguard/wgcf+p.log /etc/wireguard/ID /usr/bin/wireguard-go wgcf-account.toml wgcf-profile.conf" -cron1="rm -rf CFwarp.sh screen.sh check.sh WARP-CR.sh WARP-CP.sh WARP-UP.sh /usr/bin/cf" -cron2(){ -sed -i '/check.sh/d' /etc/crontab ; sed -i '/WARP-CR.sh/d' /etc/crontab ; sed -i '/WARP-CP.sh/d' /etc/crontab ; sed -i '/WARP-UP.sh/d' /etc/crontab -} -cron3(){ -screen -S up -X quit;screen -S aw -X quit;screen -S cr -X quit;screen -S cp -X quit -} -ab="1.彻底卸载并清除warp脚本及相关进程文件\n0.返回上一层\n 请选择：" -readp "$ab" cd -case "$cd" in -# 1 ) [[ $(type -P wg-quick) ]] && (cwg ; $wj ; green "Wgcf-WARP(+)卸载完成" && ShowWGCF && WGCFmenu && back) || (yellow "并未安装Wgcf-WARP(+)，无法卸载" && bash CFwarp.sh);; -# 2 ) [[ $(type -P warp-cli) ]] && (cso ; green "Socks5-WARP(+)卸载完成" && ShowSOCKS5 && S5menu && back) || (yellow "并未安装Socks5-WARP(+)，无法卸载" && bash CFwarp.sh);; -1 ) [[ ! $(type -P wg-quick) && ! $(type -P warp-cli) ]] && (red "并没有安装任何的warp功能，无法卸载" && CFwarp.sh) || (cron3 ; cron2 ; $cron1 ; cwg ; $wj ; green "warp已全部卸载完成" && ShowWGCF && WGCFmenu && exit);; -0 ) WARPOC -esac -} - -WARPOC(){ -ab="1.完全关闭或开启warp功能\n2.卸载warp功能\n0.返回上一层\n 请选择：" +ab="1.仅卸载warp\n2.仅卸载socks5-warp\n3.彻底卸载warp（1+2）\n 请选择：" readp "$ab" cd case "$cd" in -1 ) WARPonoff;; -2 ) WARPun;; -0 ) bash CFwarp.sh +1 ) cwg && green "warp卸载完成" && ShowWGCF && WGCFmenu;; +2 ) cso && green "socks5-warp卸载完成" && ShowSOCKS5 && S5menu;; +3 ) cwg && rm -rf /root/warpip && cso && unreswarp && green "warp与socks5-warp都已卸载完成" && ShowWGCF;ShowSOCKS5;IP_Status_menu;; esac } @@ -645,15 +1665,13 @@ UPwpyg(){ if [[ ! $(type -P wg-quick) && ! $(type -P warp-cli) ]] && [[ ! -f '/root/CFwarp.sh' ]]; then red "未正常安装CFwarp脚本!" && exit fi -rm -rf /root/CFwarp.sh /usr/bin/cf -wget -N https://gitlab.com/rwkgyg/CFwarp/raw/main/CFwarp.sh -chmod +x /root/CFwarp.sh -ln -sf /root/CFwarp.sh /usr/bin/cf -green "CFwarp安装脚本升级成功" +upcfwarp } warpinscha(){ -yellow "提示：VPS的出站IP将被你选择的warp IP所接管，如VPS无该出站IP，则另外生成" +yellow "提示：VPS的本地出站IP将被你选择的warp的IP所接管，如VPS本地无该出站IP，则被另外生成warp的IP所接管" +echo +yellow "如果你什么都不懂，回车便是！！！" echo green "1. 安装/切换wgcf-warp单栈IPV4（回车默认）" green "2. 安装/切换wgcf-warp单栈IPV6" @@ -671,8 +1689,12 @@ fi echo } +changewarp(){ +cwg && ONEWARPGO +} + start_menu(){ -ShowWGCF +ShowWGCF;ShowSOCKS5 clear green "~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~" echo -e "${bblue} ░██ ░██ ░██ ██ ██ ░█${plain}█ ░██ ░██ ░██ ░█${red}█ ░██${plain} " @@ -682,27 +1704,36 @@ echo -e "${bblue} ░██ ░${plain}██ ░██ ██ echo -e "${bblue} ░██ ${plain} ░██ ░░██ ░██ ░██ ░${red}██ ░██ ░██ ░██ ${plain} " echo -e "${bblue} ░█${plain}█ ░██ ██ ██ ░██ ░░${red}██ ░██ ░░██ ░██ ░░██ ${plain} " echo -white " 甬哥Gitlab项目 ：gitlab.com/rwkgyg" -white " 甬哥blogger博客 ：ygkkk.blogspot.com" -white " 甬哥YouTube频道 ：www.youtube.com/c/甬哥侃侃侃kkkyg" +white "甬哥Github项目 ：github.com/yonggekkk" +white "甬哥blogger博客 ：ygkkk.blogspot.com" +white "甬哥YouTube频道 ：www.youtube.com/@ygkkk" green "~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~" -yellow " 安装warp成功后，进入脚本快捷方式：cf" +yellow " 任意选择适合自己的warp现实方案（选项1、2、3，可单选，可多选共存）" +yellow " 进入脚本快捷方式：cf" white " =================================================================" -green " 1. 安装/切换wgcf-warp（必选）" -green " 2. warp关闭、开启、卸载" -green " 3. warp刷刷刷选项：warp+流量……" -green " 4. warp三类账户升级/切换(warp/warp+/warp+Teams)" -green " 5. 更新CFwarp脚本" +green " 1. 方案一：安装/切换WGCF-WARP" +[[ $cpu != amd64* ]] && red " 2. 提示：当前VPS的CPU并非AMD64架构，目前不支持安装Socks5-WARP" || green " 2. 方案二：安装Socks5-WARP" +green " 3. 方案三：显示Xray-WireGuard-WARP代理配置文件、二维码" +green " 4. 卸载WARP" +white " -----------------------------------------------------------------" +green " 5. 关闭、开启/重启WARP" +green " 6. WARP其他选项：查看WARP进程守护，刷WARP+流量……" +green " 7. WARP三类账户升级/切换(WARP/WARP+/WARP Teams)" +green " 8. 更新CFwarp安装脚本" +green " 9. 卸载WGCF-WARP切换为WARP-GO内核" green " 0. 退出脚本 " -white " =================================================================" +red "~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~" if [[ $(type -P wg-quick) || $(type -P warp-cli) ]] && [[ -f '/root/CFwarp.sh' ]]; then if [ "${wpygV}" = "${remoteV}" ]; then -green " 当前CFwarp脚本版本号：${wpygV} 重置版第一版 ，已是最新版本\n" +echo -e " 当前 CFwarp 脚本版本号：${bblue}${wpygV}${plain} 重置版第四版 ，已是最新版本\n" else -green " 当前CFwarp脚本版本号：${wpygV}" -yellow " 检测到最新CFwarp脚本版本号：${remoteV} ，可选择8进行更新\n" +echo -e " 当前 CFwarp 脚本版本号：${bblue}${wpygV}${plain}" +echo -e " 检测到最新CFwarp脚本版本号：${yellow}${remoteV}${plain}" +echo -e " ${yellow}$(wget -qO- https://gitlab.com/rwkgyg/CFwarp/raw/main/version/warpV)${plain}" +echo -e " 可选择8进行更新\n" fi fi +red "~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~" white " VPS系统信息如下：" white " VPS操作系统: $(blue "$op") \c" && white " 内核版本: $(blue "$version") \c" && white " CPU架构 : $(blue "$cpu") \c" && white " 虚拟化类型: $(blue "$vi")" IP_Status_menu @@ -710,15 +1741,66 @@ echo readp " 请输入数字:" Input case "$Input" in 1 ) warpinscha;; - 2 ) WARPOC;; - 3 ) warprefresh;; - 4 ) WARPup;; - 5 ) UPwpyg;; + 2 ) [[ $cpu = amd64 ]] && SOCKS5ins || bash CFwarp.sh;; + 3 ) WGproxy;; + 4 ) WARPun && uncf;; + 5 ) WARPonoff;; + 6 ) WARPtools;; + 7 ) WARPup;; + 8 ) UPwpyg;; + 9 ) changewarp;; * ) exit esac } if [ $# == 0 ]; then -start +cpujg start_menu fi +} + +startCFwarp(){ +clear +green "~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~" +echo -e "${bblue} ░██ ░██ ░██ ██ ██ ░█${plain}█ ░██ ░██ ░██ ░█${red}█ ░██${plain} " +echo -e "${bblue} ░██ ░██ ░██ ░░██${plain} ░██ ░██ ░██ ░██${red} ░██ ░██${plain} " +echo -e "${bblue} ░██ ░██ ░██ ${plain} ░██ ██ ░██ █${red}█ ░██ ██ ${plain} " +echo -e "${bblue} ░██ ░${plain}██ ░██ ██ ░██ ██ ░█${red}█ ██ ░██ ██ ${plain} " +echo -e "${bblue} ░██ ${plain} ░██ ░░██ ░██ ░██ ░${red}██ ░██ ░██ ░██ ${plain} " +echo -e "${bblue} ░█${plain}█ ░██ ██ ██ ░██ ░░${red}██ ░██ ░░██ ░██ ░░██ ${plain} " +echo +white "甬哥Github项目 ：github.com/yonggekkk" +white "甬哥blogger博客 ：ygkkk.blogspot.com" +white "甬哥YouTube频道 ：www.youtube.com/@ygkkk" +green "~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~" +yellow " 提示：" +yellow " 一、选项1与2任意选，支持相互切换" +yellow " 二、进入脚本快捷方式：cf" +white " =================================================================" +green " 1. 使用 WARP-GO 安装WARP(推荐)" +green " 2. 使用 WGCF 安装WARP" +green " 0. 退出脚本" +white " =================================================================" +echo +readp " 请输入数字:" Input +case "$Input" in + 1 ) ONEWARPGO;; + 2 ) ONEWGCFWARP;; + * ) exit +esac +} +if [ $# == 0 ]; then +if [[ -n $(type -P warp-go) && -z $(type -P wg-quick) ]] && [[ -f '/root/CFwarp.sh' ]]; then +ONEWARPGO +elif [[ -n $(type -P warp-go) && -n $(type -P warp-cli) && -z $(type -P wg-quick) ]] && [[ -f '/root/CFwarp.sh' ]]; then +ONEWARPGO +elif [[ -z $(type -P warp-go) && -z $(type -P wg-quick) && -n $(type -P warp-cli) ]] && [[ -f '/root/CFwarp.sh' ]]; then +ONEWARPGO +elif [[ -n $(type -P wg-quick) && -z $(type -P warp-go) ]] && [[ -f '/root/CFwarp.sh' ]]; then +ONEWGCFWARP +elif [[ -n $(type -P wg-quick) && -n $(type -P warp-cli) && -z $(type -P warp-go) ]] && [[ -f '/root/CFwarp.sh' ]]; then +ONEWGCFWARP +else +startCFwarp +fi +fi