diff --git a/point/acwarp.sh b/point/acwarp.sh
deleted file mode 100644
index c3a3549..0000000
--- a/point/acwarp.sh
+++ /dev/null
@@ -1,309 +0,0 @@
-#!/bin/bash
-export LANG=en_US.UTF-8
-case "$(uname -m)" in
-	x86_64 | x64 | amd64 )
-	cpu=amd64
-	;;
-	i386 | i686 )
-        cpu=386
-	;;
-	armv8 | armv8l | arm64 | aarch64 )
-        cpu=arm64
-	;;
-	armv7l )
-        cpu=arm
-	;;
-	* )
-	echo "当前架构为$(uname -m)，暂不支持"
-	exit
-	;;
-esac
-
-rmrf(){
-rm -rf wgcf-account.toml wgcf-profile.conf warpgo.conf sbwarp.json warp-go warp.conf wgcf warp-api-wg.txt warpapi
-}
-
-note(){
-echo "相关说明："
-echo -e "一、查看warp账户状态请以此网站为准：https://www.cloudflare.com/cdn-cgi/trace"
-echo -e "warp=on表示普通免费账户、warp=plus表示warp+或者teams团队账户、warp=off表示非warp网络\n"
-echo -e "二、此配置与当前注册平台无任何关联，根据实际使用平台的本地网络就近原则来判定warp的IP地区\n"
-echo -e "三、此配置中相关参数可应用于Wireguard客户端、Xray协议的Wireguard-warp出站配置等各类平台\n"
-echo -e "四、此配置中Endpoint的IP端口可替换为实际使用平台的本地网络测试warp优选后的IP端口\n"
-echo -e "五、此配置中PrivateKey、Address的V6地址、reserved(可选)，三个参数相互绑定关联\n"
-#echo "当前Sing-box出站配置文件如下" && sleep 1
-#echo "$(cat /usr/local/bin/sbwarp.json | python3 -mjson.tool)"
-}
-
-acwarpapi(){
-echo "下载warp api注册程序"
-curl -L -o warpapi -# --retry 2 https://gitlab.com/rwkgyg/CFwarp/-/raw/main/point/cpu1/$cpu
-chmod +x warpapi
-output=$(./warpapi)
-if ./warpapi 2>&1 | grep -q "connection refused"; then
-echo "申请warp api普通账户失败，请尝试使用warp-go方式进行注册" && exit
-fi
-private_key=$(echo "$output" | awk -F ': ' '/private_key/{print $2}')
-v6=$(echo "$output" | awk -F ': ' '/v6/{print $2}')
-res=$(echo "$output" | awk -F ': ' '/reserved/{print $2}' | tr -d '[:space:]')
-cat > warp-api-wg.txt <<EOF
-[Interface]
-PrivateKey = $private_key
-Address = 172.16.0.2/32, $v6/128
-DNS = 1.1.1.1
-MTU = 1280
-[Peer]
-PublicKey = bmXOC+F1FxEMF9dyiK2H5/1SUtzH0JuVo51h2wPfgyo=
-AllowedIPs = 0.0.0.0/0, ::/0
-Endpoint = 162.159.193.10:2408
-EOF
-clear
-echo
-echo "warp账户申请成功" && sleep 3
-echo
-echo "reserved值：$res" && sleep 2
-echo
-echo "warp-wireguard（api）配置信息如下" && sleep 2
-cat warp-api-wg.txt
-echo
-sleep 2
-qrencode -t ansiutf8 < warp-api-wg.txt 2>/dev/null
-echo
-note
-rmrf
-}
-
-wgcfreg(){
-echo "下载warp-wgcf注册程序"
-curl -L -o wgcf -# --retry 2 https://gitlab.com/rwkgyg/cfwarp/-/raw/main/wgcf_2.2.20_$cpu
-chmod +x wgcf
-echo | ./wgcf register 2> /dev/null
-if echo | ./wgcf register 2>&1 | grep -q "connection refused"; then
-echo "申请warp-wgcf普通账户失败，请尝试使用warp-go方式进行注册" && exit
-fi
-until [[ -e wgcf-account.toml ]]
-do
-echo "申请warp-wgcf普通账，请等待" && sleep 1
-echo | ./wgcf register
-done
-echo | ./wgcf generate
-sed -i "s/engage.cloudflareclient.com:2408/162.159.193.10:2408/g" wgcf-profile.conf
-}
-
-wgcfup(){
-if [[ ! -e wgcf-account.toml ]]; then
-wgcfreg
-fi
-read -p "复制许可秘钥(26个字符):" ID
-if [[ -z $ID ]]; then
-echo "未输入内容" && exit
-fi
-sed -i "s/license_key.*/license_key = \"$ID\"/g" wgcf-account.toml
-echo | ./wgcf update
-echo "如显示400 Bad Request,自动还原为WARP普通账户"
-echo | ./wgcf generate
-sed -i "s/engage.cloudflareclient.com:2408/162.159.193.10:2408/g" wgcf-profile.conf
-}
-
-wgcfteams(){
-wgcfreg
-echo "Teams团队Token获取地址：https://web--public--warp-team-api--coia-mfs4.code.run/"
-read -p " 请输入团队账户Token： " TEAM_TOKEN
-WG_API=$(curl -sSL https://api.zeroteam.top/warp?format=warp-go)
-PRIVATEKEY=$(expr "$WG_API" | awk 'NR==3 {print $3}')
-PUBLICKEY=$(expr "$WG_API" | awk 'NR==10 {print $3}')
-INSTALL_ID=$(tr -dc 'A-Za-z0-9' </dev/urandom | head -c 22)
-FCM_TOKEN="${INSTALL_ID}:APA91b$(tr -dc 'A-Za-z0-9' </dev/urandom | head -c 134)"
-ERROR_TIMES=0
-while [ "$ERROR_TIMES" -le 3 ]; do
-(( ERROR_TIMES++ ))
-if [[ "$TEAMS" =~ 'token is expired' ]]; then
-read -p " 请刷新token重新复制 " TEAM_TOKEN
-elif [[ "$TEAMS" =~ 'error' ]]; then
-read -p " 请刷新token重新复制 " TEAM_TOKEN
-elif [[ "$TEAMS" =~ 'organization' ]]; then
-break
-fi
-TEAMS=$(curl --silent --location --tlsv1.3 --request POST 'https://api.cloudflareclient.com/v0a2158/reg' \
---header 'User-Agent: okhttp/3.12.1' \
---header 'CF-Client-Version: a-6.10-2158' \
---header 'Content-Type: application/json' \
---header "Cf-Access-Jwt-Assertion: ${TEAM_TOKEN}" \
---data '{"key":"'${PUBLICKEY}'","install_id":"'${INSTALL_ID}'","fcm_token":"'${FCM_TOKEN}'","tos":"'$(date +"%Y-%m-%dT%H:%M:%S.%3NZ")'","model":"Linux","serial_number":"'${INSTALL_ID}'","locale":"zh_CN"}')
-ADDRESS6=$(expr "$TEAMS" : '.*"v6":[ ]*"\([^"]*\).*')
-done
-sed -i "s#PrivateKey.*#PrivateKey = $PRIVATEKEY#g;s#Address.*128#Address = $ADDRESS6/128#g" wgcf-profile.conf
-}
-
-wgcfshow(){
-clear
-echo
-echo "warp账户申请成功" && sleep 2
-echo
-echo "warp-wireguard(wgcf)配置信息如下" && sleep 2
-cat wgcf-profile.conf
-echo
-sleep 2
-qrencode -t ansiutf8 < wgcf-profile.conf 2>/dev/null
-echo
-note
-rmrf
-}
-
-warpgoac(){
-echo "下载warp-go注册程序"
-curl -L -o warp-go -# --retry 2 https://gitlab.com/rwkgyg/CFwarp/-/raw/main/warp-go_1.0.8_linux_${cpu}
-chmod +x warp-go
-curl -L -o warp.conf --retry 2 https://api.zeroteam.top/warp?format=warp-go
-if [[ ! -s warp.conf ]]; then
-curl -L -o warpapi -# --retry 2 https://gitlab.com/rwkgyg/CFwarp/-/raw/main/point/cpu1/$cpu
-chmod +x warpapi
-output=$(./warpapi)
-private_key=$(echo "$output" | awk -F ': ' '/private_key/{print $2}')
-device_id=$(echo "$output" | awk -F ': ' '/device_id/{print $2}')
-warp_token=$(echo "$output" | awk -F ': ' '/token/{print $2}')
-rm -rf warpapi
-cat > warp.conf <<EOF
-[Account]
-Device = $device_id
-PrivateKey = $private_key
-Token = $warp_token
-Type = free
-Name = WARP
-MTU  = 1280
-
-[Peer]
-PublicKey = bmXOC+F1FxEMF9dyiK2H5/1SUtzH0JuVo51h2wPfgyo=
-Endpoint = 162.159.193.10:1701
-# AllowedIPs = 0.0.0.0/0
-# AllowedIPs = ::/0
-KeepAlive = 30
-EOF
-fi
-}
-
-warpgoplus(){
-warpgoac
-echo "请复制手机WARP客户端WARP+状态下的按键许可证秘钥 或 网络分享的秘钥（26个字符）"
-read -p "请输入升级WARP+密钥：" ID
-if [[ -z $ID ]]; then
-echo "未输入内容" && exit
-fi
-if ./warp-go --update --config=warp.conf --license=$ID --device-name=warp+$(date +%s%N |md5sum | cut -c 1-3) 2>&1 | grep -q "connection refused"; then
-echo "网络连接繁忙，升级失败"
-else
-./warp-go --update --config=warp.conf --license=$ID --device-name=warp+$(date +%s%N |md5sum | cut -c 1-3)
-fi
-}
-
-warpgoteams(){
-warpgoac
-echo "Teams团队Token获取地址：https://web--public--warp-team-api--coia-mfs4.code.run/"
-read -p "请输入团队账户Token：" ID
-if ./warp-go --register --config=warp.conf --team-config=$ID --device-name=warp+teams+$(date +%s%N |md5sum | cut -c 1-3) 2>&1 | grep -q "connection refused"; then
-echo "网络连接繁忙，升级失败"
-else
-./warp-go --register --config=warp.conf --team-config=$ID --device-name=warp+teams+$(date +%s%N |md5sum | cut -c 1-3)
-fi
-}
-
-warpgoconfig(){
-if ./warp-go --config=warp.conf --export-wireguard=warpgo.conf 2>&1 | grep -q "connection refused"; then
-echo "网络连接繁忙，仅生成WARP-IPV4配置" && sleep 1
-output=$(cat warp.conf)
-private_key=$(sed -n 's/PrivateKey = \(.*\)/\1/p' warp.conf)
-cat > warpgo.conf <<EOF
-[Interface]
-PrivateKey = $private_key
-Address = 172.16.0.2/32
-DNS = 1.1.1.1
-MTU = 1280
-[Peer]
-PublicKey = bmXOC+F1FxEMF9dyiK2H5/1SUtzH0JuVo51h2wPfgyo=
-AllowedIPs = 0.0.0.0/0
-Endpoint = 162.159.193.10:2408
-EOF
-else
-./warp-go --config=warp.conf --export-wireguard=warpgo.conf
-./warp-go --config=warp.conf --export-singbox=sbwarp.json
-fi
-sed -i "s/engage.cloudflareclient.com:2408/162.159.193.10:2408/g" warpgo.conf
-}
-
-warpgoshow(){
-clear
-echo
-echo "warp账户申请成功" && sleep 3
-echo
-reserved=$(grep -o '"reserved":\[[^]]*\]' sbwarp.json 2> /dev/null)
-if [[ -n $reserved ]]; then
-echo "reserved值：$reserved" && sleep 2
-fi
-echo
-echo "warp-wireguard（warp-go）配置信息如下" && sleep 2
-cat warpgo.conf
-echo
-sleep 2
-qrencode -t ansiutf8 < warpgo.conf 2>/dev/null
-echo
-note
-rmrf
-}
-
-acwgcf(){
-echo
-echo "1.warp-wgcf普通账户"
-echo "2.warp-wgcf+账户"
-#echo "3.warp-wgcf+teams团队账户"
-echo "0.退出"
-read -p "请选择: " menu
-if [ "$menu" == "1" ];then
-wgcfreg && wgcfshow
-elif [ "$menu" == "2" ];then
-wgcfup && wgcfshow
-#elif [ "$menu" == "3" ];then
-#wgcfteams && wgcfshow
-else 
-exit
-fi
-}
-
-acwarpgo(){
-echo
-echo "1.warp-go普通账户"
-echo "2.warp-go+账户"
-echo "3.warp-go+teams团队账户"
-echo "0.退出"
-read -p "请选择: " menu
-if [ "$menu" == "1" ];then
-warpgoac && warpgoconfig && warpgoshow
-elif [ "$menu" == "2" ];then
-warpgoplus && warpgoconfig && warpgoshow
-elif [ "$menu" == "3" ];then
-warpgoteams && warpgoconfig && warpgoshow
-else 
-exit
-fi
-}
-
-echo "------------------------------------------------------"
-echo "甬哥Github项目  ：github.com/yonggekkk"
-echo "甬哥Blogger博客 ：ygkkk.blogspot.com"
-echo "甬哥YouTube频道 ：www.youtube.com/@ygkkk"
-echo "注册生成WARP-Wireguard配置文件、二维码  V2023.12.20"
-echo "------------------------------------------------------"
-echo
-echo "1.选择 warp-go  注册warp配置 (支持所有账户升级，显示reserved值，推荐) "
-echo "2.选择 wgcf     注册warp配置 (支持普通账户、+账户)    "
-echo "3.选择 warp api 注册warp配置 (支持普通账户，显示reserved值)"
-echo "0.退出"
-read -p "请选择: " menu
-if [ "$menu" == "1" ];then
-acwarpgo
-elif [ "$menu" == "3" ];then
-acwarpapi
-elif [ "$menu" == "2" ];then
-acwgcf
-else 
-exit
-fi
\ No newline at end of file