Update CFwarp.sh

CFwarp.sh

@@ -253,7 +253,7 @@ cd /root/warpip
 wait
 cd
 export endpoint=`cat /root/warpip/result.csv | awk -F, '$3!="timeout ms" {print} ' | sed -n '2p' | awk -F ',' '{print $1}'`
-green "本地VPS优选的warp对端IP地址：$endpoint"
+green "脚本将自动应用本地VPS优选的warp对端IP地址：$endpoint"
 }
 
 warpip(){
@@ -272,7 +272,7 @@ systemctl start warp-go >/dev/null 2>&1
 fi
 else
 export endpoint=`cat /root/warpip/result.csv | awk -F, '$3!="timeout ms" {print} ' | sed -n '2p' | awk -F ',' '{print $1}'`
-green "本地VPS优选的warp对端IP地址：$endpoint"
+green "脚本将自动应用本地VPS优选的warp对端IP地址：$endpoint"
 fi
 }
 warpip
@@ -481,7 +481,7 @@ white "-------------------------------------------------------------------------
 }
 S5menu(){
 white "------------------------------------------------------------------------------------------------"
-white " 当前Socks5-WARP客户端本地代理情况如下  (不支持 纯IPV6 VPS)"
+white " 当前Socks5-WARP官方客户端本地代理情况如下"
 blue " ${S5Status}"
 white "------------------------------------------------------------------------------------------------"
 }
@@ -1057,28 +1057,19 @@ mtuwarp
 sed -i "s/MTU.*/MTU = $MTU/g" /usr/local/bin/warp.conf
 done
 fi
-green "\n根据网络环境，选择Wireguard代理节点的Endpoint对端IP地址，不懂就回车吧"
-readp "1. 使用IPV4地址 (支持v4或v6+v4网络环境，回车默认)\n2. 使用IPV6地址 (仅支持v6+v4网络环境)\n请选择：" IPet
-if [ -z "${IPet}" ] || [ $IPet == "1" ]; then
-endip=162.159.193.10
-elif [ $IPet == "2" ]; then
-endip=[2606:4700:d0::]
-else 
-red "输入错误，请重新选择" && WGproxy
-fi
 /usr/local/bin/warp-go --config=/usr/local/bin/warp.conf --export-wireguard=/usr/local/bin/wgwarp.conf
 sed -i '/Endpoint/d' /usr/local/bin/wgwarp.conf
-sed -i "11a Endpoint = $endip:1701" /usr/local/bin/wgwarp.conf
+sed -i "11a Endpoint = $endpoint" /usr/local/bin/wgwarp.conf
 /usr/local/bin/warp-go --config=/usr/local/bin/warp.conf --export-singbox=/usr/local/bin/sbwarp.json
-green "当前Wireguard配置文件如下" && sleep 1
+green "当前Wireguard-warp配置参数如下" && sleep 1
 white "$(cat /usr/local/bin/wgwarp.conf)\n"
 yellow "注意："
-yellow "一、以上Wireguard-warp配置参数与当前VPS无任何关联，可理解为独立的Wireguard-warp配置，你可以疯狂滥用于各平台\n"
-yellow "二、以上Wireguard-warp配置参数可全部复制用于Wireguard客户端，个别参数可复制用于Xray协议的Wireguard-warp出站配置\n"
-yellow "三、以上配置中Endpoint默认IP端口可替换为：各平台在本地网络运营商（中国移动、中国联通、中国电信）测试warp优选后的IP端口"
-yellow "当前VPS平台优选Endpoint的IP端口：$endpoint\n"
-yellow "四、PrivateKey、Address的V6地址、reserved(可选)，三个参数相互绑定关联"
-yellow "当前VPS平台的reserved参数值：$(grep -o '"reserved":\[[^]]*\]' /usr/local/bin/sbwarp.json)\n"
+yellow "一、此配置与当前VPS无任何关联，根据各平台本地网络就近原则来判定CF的IP地区\n"
+yellow "二、此配置可全部复制用于Wireguard客户端，个别参数可复制用于Xray协议的Wireguard-warp出站配置\n"
+yellow "三、此配置中Endpoint的IP端口：$endpoint，为当前VPS平台warp优选测试结果"
+yellow "   如应用于其他各平台，建议将 $endpoint 替换为其他平台本地网络测试warp优选后的IP端口\n"
+yellow "四、此配置中PrivateKey、Address的V6地址、reserved(可选)，三个参数相互绑定关联"
+yellow "   当前VPS平台的reserved参数值：$(grep -o '"reserved":\[[^]]*\]' /usr/local/bin/sbwarp.json)\n"
 green "当前Wireguard节点二维码分享链接如下" && sleep 1
 qrencode -t ansiutf8 < /usr/local/bin/wgwarp.conf
 echo
@@ -1101,7 +1092,7 @@ white "甬哥Github项目  ：github.com/yonggekkk"
 white "甬哥blogger博客 ：ygkkk.blogspot.com"
 white "甬哥YouTube频道 ：www.youtube.com/@ygkkk"
 green "~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~"
-yellow " 任意选择适合自己的warp现实方案（选项1、2、3，可单选，可多选）"
+yellow " 任意选择适合自己的warp现实方案（选项1、2、3，可单选，可多选共存）"
 yellow " 进入脚本快捷方式：cf"
 white " ================================================================="
 green "  1. 方案一：安装/切换WARP-GO"
@@ -1255,23 +1246,19 @@ ShowWGCF && WGCFmenu
 }
 
 WGproxy(){
-[[ ! $(type -P wg-quick) ]] && red "未安装Wgcf-WARP" && bash CFwarp.sh
-green "\n根据网络环境，选择Wireguard代理节点的Endpoint对端IP地址，不懂就回车吧"
-readp "1. 使用IPV4地址 (支持v4或v6+v4网络环境，回车默认)\n2. 使用IPV6地址 (仅支持v6+v4网络环境)\n请选择：" IPet
-if [ -z "${IPet}" ] || [ $IPet == "1" ];then
-endip=162.159.193.10
-elif [ $IPet == "2" ];then
-endip=[2606:4700:d0::]
-else 
-red "输入错误，请重新选择" && WGproxy
-fi
+[[ ! $(type -P wg-quick) ]] && red "未安装Wgcf-WARP，安装好wgcf-warp才能执行" && sleep 3 && bash CFwarp.sh
 cp -f /etc/wireguard/wgcf.conf /etc/wireguard/wgproxy.conf >/dev/null 2>&1
 sed -i '/PostUp/d;/PostDown/d;/AllowedIPs/d;/Endpoint/d' /etc/wireguard/wgproxy.conf
 sed -i "8a AllowedIPs = 0.0.0.0\/0\nAllowedIPs = ::\/0\n" /etc/wireguard/wgproxy.conf
-sed -i "10a Endpoint = $endip:1701" /etc/wireguard/wgproxy.conf
-green "当前wireguard客户端配置文件wgproxy.conf内容如下，保存到 /etc/wireguard/wgproxy.conf\n" && sleep 2
-yellow "$(cat /etc/wireguard/wgproxy.conf)\n"
-yellow "当前VPS平台优选Endpoint的IP：$endpoint\n"
+sed -i "10a Endpoint = $endpoint" /etc/wireguard/wgproxy.conf
+green "当前wireguard-warp配置文件wgproxy.conf内容如下，保存到 /etc/wireguard/wgproxy.conf\n" && sleep 2
+white "$(cat /etc/wireguard/wgproxy.conf)\n"
+yellow "注意："
+yellow "一、此配置与当前VPS无任何关联，根据各平台本地网络就近原则来判定CF的IP地区\n"
+yellow "二、此配置可全部复制用于Wireguard客户端\n"
+yellow "三、此配置中Endpoint的IP端口：$endpoint，为当前VPS平台warp优选测试结果"
+yellow "   如应用于其他各平台，建议将 $endpoint 替换为其他平台本地网络测试warp优选后的IP端口\n"
+yellow "四、此配置中PrivateKey与Address的V6地址，这两个参数相互绑定关联\n"
 green "当前wireguard节点二维码分享链接如下" && sleep 2
 qrencode -t ansiutf8 < /etc/wireguard/wgproxy.conf
 }
@@ -1529,7 +1516,7 @@ python3 wp-plus.py
 }
 
 WARPup(){
-[[ ! $(type -P wg-quick) ]] && red "未安装wgcf-warp" && bash CFwarp.sh
+[[ ! $(type -P wg-quick) ]] && red "未安装wgcf-warp，安装好wgcf-warp才能执行" && sleep 3 && bash CFwarp.sh
 backconf(){
 yellow "升级失败，自动恢复warp普通账户"
 sed -i "2s#.*#$(sed -ne 2p /etc/wireguard/wgcf-profile.conf)#;4s#.*#$(sed -ne 4p /etc/wireguard/wgcf-profile.conf)#" /etc/wireguard/wgcf.conf
@@ -1671,7 +1658,7 @@ white "甬哥Github项目  ：github.com/yonggekkk"
 white "甬哥blogger博客 ：ygkkk.blogspot.com"
 white "甬哥YouTube频道 ：www.youtube.com/@ygkkk"
 green "~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~"
-yellow " 任意选择适合自己的warp现实方案（选项1、2、3，可单选，可多选）"
+yellow " 任意选择适合自己的warp现实方案（选项1、2、3，可单选，可多选共存）"
 yellow " 进入脚本快捷方式：cf"
 white " ================================================================="
 green "  1. 方案一：安装/切换WGCF-WARP"